Operator`s manual

6–2 • Memories, USB Storage, and Upgrades CrossOver 16 User Manual (v4.0)
Only DVE key parameters are recalled and this
Recall Mode applies only to DVE keys.
• EffDis — The Effects Dissolve feature allows
you to slew from one memory to another using a
memory recall. The switcher will interpolate from
the starting memory to the destination memory,
creating a smooth, two keyframe effect.
The following elements can be interpolated in the
effects dissolve:
› Matte colors (background, wash or borders)
› Keyer settings like clip, gain, transparency
› Mask position and size
› Chroma key settings, except the background
color
› Pattern settings like size, position, aspect,
border, softness, rotation
› DVE settings like size, position, aspect, border,
softness, cropping
› MediaStore x/y position
› Transition Progress
Other elements, such as key priority, crosspoint
selection, pattern, and next transition data are
recalled first, and then the switcher will slew to
the recalled memory.
An effects dissolve can be performed on as many
elements as required, based on the memory that is
being recalled.
Effects Dissolve Duration (EffDur)
EffDur Sets the duration of an Effects Dissolve
memory recall. This attribute is only applicable when
the Mode attribute is set to EffDiss.
• Memory (Recall Only) — The memory
attributes stored in the memory are used.
• 1-999fr — Sets the duration of the effects
dissolve, in frames.
Program Bus Recall (PGMBus)
PGMBus sets whether the sources selected on the
Background/Program bus, when the memory was
stored, are recalled with the memory.
• Memory (Recall Only) — The memory
attributes stored in the memory are used.
• NoRcl — The sources stored in the memory are
not recalled.
• Recall — The sources that were stored in the
memory are recalled and replace the currently
selected source on the Program bus. This is the
default setting.
Preset Bus Recall (PSTBus)
PSTBus sets whether sources selected on the Preset
bus, when the memory was stored, are recalled with
the memory.
• Memory (Recall Only) — The memory
attributes stored in the memory are used.
• NoRcl — The sources stored in the memory are
not recalled.
• Recall — The sources that were stored in the
memory are recalled and replace the currently
selected source on the Preset bus. This is the
default setting.
Transition Area Recall (Trans)
Trans sets whether the Transition Parameter and
Transition Type buttons, but not the Fader, Transition
or Next Transition Select buttons, are recalled with
the memory.
• Memory (Recall Only) — The memory
attributes stored in the memory are used.
• NoRcl — The sources stored in the memory are
not recalled.
• Recall — The sources that were stored in the
memory are recalled and replace the currently
selected source on the Preset bus. This is the
default setting.
Next Transition Recall (NextTr)
NextTr sets whether the selections of the Next
Transition Select buttons in the Transition Area are
recalled with the memory.
• Memory (Recall Only) — The memory
attributes stored in the memory are used.
•
NoRcl — The selections
stored in the memory
are not recalled.
• Recall — The selections that were stored in the
memory are recalled and replace the currently
settings of the Next Transition Select buttons. This
is the default setting.
Run Auto Transition (RnAuto)
RnAuto sets whether an auto transition is performed
after a memory is recalled. Remember to set up the
transition in the Transition Area when you store the