Operator`s manual

CrossOver 16 User Manual (v4.0) Specifications • 9–5
Table 9.4 GVG100 Supported Lamps
Name MLE/Keyer Byte Code Notes
Program Bus 0-9 MLE 0x00-0x09 Turning OFF results in a protocol error.
Program Bus On Air MLE 0x0A Turning OFF results in a protocol error.
Autotrans MLE 0x0B
Key Dissolve Keyer 0x0C
Key Cut Keyer 0x0D
Wipe Trans MLE 0x0E
Dissolve Trans MLE 0x0F
Preset Bus 0-9 MLE 0x10-0x19 Turning OFF results in a protocol error.
Preset Bus On Air MLE 0x1A Turning OFF results in a protocol error.
Aspect On
MLE 0x1B Always on. Turning OFF results in a
protocol error.
Positioner On
MLE 0x1C Always on. Turning OFF results in a
protocol error.
Reverse Wipe MLE 0x1D
Dsk Preview
Keyer 0x1E Always true. All Keyers show on
Preview Turning OFF results in a
protocol error.
Fade To Black — 0x1F
Key Bus 0-9 Keyer 0x20-0x29 Turning OFF results in a protocol error.
Key Bus On Air Keyer 0x2A Turning OFF results in a protocol error.
Key Video Fill
Keyer 0x2F Always true. Turning OFF results in a
protocol error.
Wipe Type MLE 0x30-0x39 Turning OFF results in a protocol error.
Key Invert
Keyer 0x40 DSKs. Turning OFF results in a protocol
error.
Key Mask
Keyer 0x41 DSKs. Turning OFF results in a protocol
error.
Key Autokey
Keyer 0x42 DSKs. Turning OFF results in a protocol
error.
Key Selfkey
Keyer 0x43 DSKs. Turning OFF results in a protocol
error.
Key Invert Keyer 0x44 Turning OFF results in a protocol error.
Key Mask Keyer 0x45 Turning OFF results in a protocol error.
Memory Mode Toggle
— 0x47 Toggles between memory and pattern
modes.
Next Trans Is Bkgd — 0x48 Turning OFF results in a protocol error.
Next Trans Is Key 1 — 0x49 Turning OFF results in a protocol error.
Cut MLE 0x4A Turning OFF results in a protocol error.