Specifications

2.
Press the source button for the Media-Store
channel that you want to load a still into. If the
le has an alpha, the paired channel will load
the alpha as well.
3.
Press NEXT.
4.
Use the Attrib knob to select the attribute you
want to set, and the Value knob to select the
value you want to assign to the attribute.
•
X Pos — selects the horizontal position of
the image or animation
•
Y Pos — selects the vertical position of the
image or animation
•
Shaped — selects shaped or unshaped for
the alpha of the image or animation
•
Looping — selects whether the animation
loops automatically or not
•
Reverse — selects whether the animation
plays in reverse or not
•
AutoPly — selects whether the animation
starts playing automatically when taken
on-air or not
•
Speed — selects the speed that an animation
plays at (0.1-10)
•
MediaX — selects the media number that
you want to use to recall the still or animation
•
CutFr — selects the point, in frames, from
the start of the animation that the background
cut occurs
•
GPO — selects the GPI output that you want
to trigger by a media transition
•
GPOFr — selects the time, in frames, from
the start of the media transition that the GPI
output is triggered
•
Mute — selects whether the associated audio
is turned on or off during playback
5.
Use the Func knob to select how you want to
save the attributes.
•
Save — saves the adjustments for the
selected Attrib value only
•
SavAll — saves the adjustments for all
Attrib values
•
Revert — undoes the adjustments for the
selected Attrib value only
•
RevAll — undoes the adjustments for all
Attrib values
6.
Press the Func knob to make the selection.
To Lock a Media Number Place and Bank
Locking the Media Number Place and Bank means that
you do not have to enter them when loading a still. Lock
setting are specic to the channel they are set on.
1.
Press the source button for the Media-Store
channel that you want to set the Place and Bank
lock settings for.
2.
Press the Browse knob.
3.
Press NEXT.
4.
Use the Place knob to select USB or Internal.
5.
Press the Place knob to toggle the lock on or
off. Locked is shown with [] around the name.
6.
Use the Media knob to select the bank you want
to lock to.
7.
Press the Media knob to toggle the lock on or
off. Locked is shown with [] around the name.
MediaManager
The MediaManager provides a graphical interface to the
operation of the Media-Store from a web browser. The
layout of the MediaManager window is stored in
Perspectives. The last loaded Perspective is used when
the browser is refreshed or opened.
From the Menu Bar at the top of the window you can
manage Perspectives.
Tip: You can either launch the MediaManager directly using
the switcher IP address, or you can access it using the
MediaManager node in DashBoard. If you are logging into
MediaManager from DashBoard, you must have Internet
Explorer
®
10, or higher, installed.
Table 4: Menu Bar Icons
DescriptionNameIcon
Allows you to save, load, and
delete perspectives (layouts).
Perspectives
Using MediaManager
To use the MediaManager, you must have a computer
connected to the same subnet as the switcher, the IP
address of your switcher, and the Google Chrome
™
browser installed on your computer. In the web browser,
navigate to the IP address of the switcher, the
MediaManager is displayed.
When you are communicating with the switcher, a
moving status indicator is shown in the lower right corner
of the browser window. If you lose communications with
Carbonite Operation Manual (v8.0) — Media-Store • 49