User manual

CrossOver 6 / 12 User Manual (v1.4) Media-Store • 5–5

7. Use the Valu e knob to set the reverse playback

behavior. You can choose from the following:

• yes — The animation plays backwards.

• no — The animation plays forwards.

8. Use the Attrib knob to select AutoPly.

9. Use the Valu e knob to set the auto playback

behavior. You can choose from the following:

• yes — The animation starts playing

automatically when it is taken on-air.

• no — Animation playback must be started

manually.

10. Use the Attrib knob to select Speed.

11. Use the Valu e knob to set the playback speed.

You can set a playback speed from:

• 0.1x – 1.0x in 0.1x increments.

• 1x – 10x in 1x increments.

Ô Saving and Reverting Attributes

You can save attributes for an image so they are

automatically recalled the next time that image is

loaded from a USB drive or internal memory.

Image attributes that have been changed since they

were last saved are marked with a ‘*’.

To save attributes for an image:

1. Modify the attributes for an image as necessary

2. Use the Func knob to save the attributes for that

image. You can choose from the following:

• Save — Saves the currently displayed

attribute. Other saved attributes are not

affected.

• SavAll — Saves all attributes.

To revert to saved attribute values:

1. Press and hold SHIFT on any bus. If you use the

Program bus or on-air Key bus, you will affect

on-air images.

2. Press MEDIA 1 or MEDIA 2 to select the

Media-Store channel to load the image into.

3. Press NEXT until Attrib is displayed.

4. Use the Func knob to save the attributes for that

image. You can choose from the following:

• Revert — Reverts the currently displayed

attribute to the previously saved value. Other

attributes are not affected.

• RevAll — Reverts all attributes to previously

saved values.