User manual

4.2.4 Check Satellite Signal Reception

• Press the Menu Button on the Remote Control.

• The Installation Menu will be displayed.

• Using the CH- Button select Antenna Setting and then press OK.

• Please note that ASTRA 2A/B/D and Eurobird 1 satellite is labelled 4.ASTRA/EURO1.

• Your Receiver has a large number of the available Satellites already programmed in to

make setting up easier for you. You can see the Satellite name at the top right of the

OSD (On-Screen Display).

• Using the VOL+ Button select the SATELLITE you are aligning your dish to (usually this

will be the ASTRA 2A, 2B, 2D / EUROBIRD 1 if you want the most common Free to Air

English language channels such as BBC 1 ,2, etc….) and then press OK.

NOTE: DO NOT change any of the other settings

on the Antenna Setting Menu, these have already

been programmed into your receiver in the

Factory.

• Now refer back to your “Satellite Dish Installation Guide” to ﬁ ne tune your signal

reception.

• Use the signal level indicators as displayed in the two bars (Q= Quality, L=Level) towards

the bottom of the Antenna Setting Menu to help ﬁ ne tune reception (try to obtain better

than 50% for both).

4.2.5 Fast Channel Set-Up Astra 2A/B/D/Eurobird 1

The HD Satellite Receiver is pre-programmed with the most popular English Language

channels from the Astra2A/B/D and Eurobird 1 Satellites, so there is no need to scan these

channels. Simply press the Exit button to come out of the Installation menu screen, then the

Red SAT button to go into the channel list. All channels should now be available.

4.2.6 Chosen Satellite Scan

Should you wish to obtain channels from a satellite other than Astra2A/B/D and Eurobird

1, follow 4.2.4 to check your chosen satellite signal reception strength, then press the Red

(Scan) button to scan for channels from your chosen satellite.

• Your receiver will now scan for all available programmes on your selected Satellite. This

may take several minutes.

• When the Scan has completed, the Programmes will be saved automatically.

• Press EXIT to leave the Installation Menu

• You can now enjoy all the available Programmes on your chosen Satellite.