Fiber

Ordering Information
Key Features

Fiber | openGear
®
p.77
FIBER IN 1
FIBER IN 2
56
78
910
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
CARD 2CARD 1
FIBER
IN A
FIBER
IN A
FIBER
IN B
FIBER
IN B
56
78
910
SDI OUT
A1
SDI OUT
A2
SDI OUT
B
SDI OUT
A1
SDI OUT
A2
SDI OUT
B
3G / HD / SD
SDI OUT
3G / HD / SD
SDI OUT*
3G / HD / SD
SDI OUT
3G / HD / SD
SDI OUT*
3G / HD / SD
SDI OUT
3G / HD / SD
SDI OUT*
3G / HD / SD SDI
FIBER IN A
OPTICAL TO
ELECTRICAL
CONVERTER
RECLOCKER
DRIVERDRIVERDRIVER
BUFFER
3G / HD / SD SDI
FIBER IN B
OPTICAL TO
ELECTRICAL
CONVERTER
RECLOCKER
BUFFER
* Only 2 outputs for channel A and 1
output for channel B are available
when using the -R2S rear module.
 FDR-6603-R2 FDR-6603-R2S
DualOpticaltoElectricalConverter
FDR-6603 Dual Optical Receiver
RearModuleSufx(ex:[model]-R2)
-R2 Rear Module for FDR-6603
-R2S Split Rear Module for 2 FDR-6603
• Optical to Electrical for all SMPTE 424M, SMPTE 259M-C,
SMPTE 292M standards
• Supports single-mode ber
• Hot-swappable from front of frame with no external connect /
reconnect required
• Optical input range 1270nm to 1610nm
• Optical input sensitivity -18dBm
• Optical input connection: LC / UPC
• Reclocked SDI outputs
• Reclocking on all outputs at 270Mb/s, 1.483Gb/s, 1.485Gb/s,
2.967Gb/s, 2.970Gb/s
• Alarming for signal presence and input sensitivity
• 5-year transferable warranty
• Power: 5.5 watts
Dual Optical to Electrical Converter
Dual channel SDI optical to electrical converter supporting data rates from 143Mb/s to 2.97Gb/s.
The FDR-6603 is a dual ber optic receiver to serial digital
SDI converter providing 2 channels of conversion on a single
card supporting serial digital data rates from 143Mb/s up
to 2.97Gb/s (1080p). SDI outputs are reclocked providing
excellent jitter and return loss specications.
The FDR-6603 is fully hot-swappable with all active
components on the front removable card. No active
components are installed on the rear I/O connection module.
This design greatly reduces down-time eliminating any need to
access the back of the rack frame.
The -R2S high density split rear module can accommodate up
to 2 FDR-6603 cards, maximizing the number of conversion
channels in a frame. In this conguration, the OG3-FR supports
up to 40 independent channel solutions, providing ultra-high
density conversion in a 2RU space.
FDR-6603
HD
SD
3G