Operator`s manual

conversion resources by switching them into the signal path only when needed. Better yet,
the converters are engaged automatically, making the operation seamless.
In keeping with our tradition of superior interface capabilities, SmartConversion can be
used with any brand of the external cross converters available in the market …in any
format!
Additional Engineering Manual S4MDX-080
This manual contains instructions on how to install the switcher into a facility and how to
connect various external devices. It also covers after-sale option installation and provides
some basic information on system maintenance.
Additional Operator’s Manual S4MDX-081
This manual contains all of the information required to run the switcher on a day-to-day
basis.
Onsite Operational Training, 1
ST
Day S4MDX-090
Although Synergy was designed to be as easy as possible to install and operate, training is
highly recommended to ensure that the process of taking your Synergy to air is a smooth
one.
Training courses can be conducted at the customer’s site or at Ross facilities. Expenses are
included in North America. A minimum of four weeks advance notice is required for
training to ensure we can efficiently schedule the best possible training staff for your
requirements. Onsite training is provided on the customer’s switcher.
Customers are not charged for the travel time of the trainer.
Onsite Operational Training, Additional Day S4MDX-091
One full day of training on the Synergy 4 MD-X will meet most customer needs.
Additional time may be required to handle multiple training groups or if the operators
have never used a production switcher before.
Onsite Technical Training, Two Days S4MDX-092
With Synergy onsite technical training, the customer’s technical staff is introduced to the
following:
• Basic operation
• Switcher installation and configuration
• Peripheral interfacing
• Video signal flow
• System timing requirements
• Circuit block diagrams
• Circuit board overviews
• Jumpers and indicators
• Troubleshooting tips
• Software upgrading
• Routine maintenance
Page 37 of 48 March 2005 Synergy 4 MD-X Ordering Guide, v3