User's Manual
Table Of Contents
- 1. General Information
- 2. Technical Specifications
- 3. Installation
- 4. Wiring Instructions
- 5. Reader Functionality
- 5.1 Transmit Mode
- 5.2 Programming the AYC- F/G/M60 Series
- Programming Menu
- Entering Programming Mode
- Exiting Programming Mode
- Selecting Keypad Transmission Format
- Keypad Transmission Format Option Number
- Option 1: Single Key, 6-Bit Wiegand (Rosslare Format)
- Option 2: Single Key, 6-Bit Wiegand Nibble and Parities
- Option 3: Single Key, 8-Bit Wiegand Nibbles Complemented
- Option 4: 4 Keys Binary + Facility Code, 26-Bit Wiegand
- Option 5: 1 to 5 Keys + Facility Code, 26-Bit Wiegand
- Option 6: 6 Keys BCD and parity bits, 26-Bit Wiegand
- Option 7: Single Key, 3x4 Matrix Keypad (MD-P64)
- Option 8: 1 to 8 Keys BCD, Clock & Data
- Option 9: Single Key, 4-bit Wiegand
- Selecting Proximity Card Transmission Format
- Changing the Programming Code
- Changing the Facility Code
- Setting the Backlight and Reader Format
- Return to Factory Default Settings
- Replacing a Lost Programming Code
- 6. Controller Functionality
- 6.1 Normal, Secure, and Master Users
- 6.2 Modes of Operation
- 6.3 Auxiliary Input & Output
- 6.4 Door Alarms
- 6.5 Internal Case and Back Tamper
- 6.6 Lockout Feature (Keypad / Card Tamper)
- 6.7 Request to Exit (REX) Function
- 6.8 Secure Application Appurtenances
- 6.9 Programming the AYC- F/G/M60
- Programming Menu
- Entering Programming Mode
- Exiting Programming Mode
- Changing Lock Strike Code
- Changing Auxiliary Code
- Changing the Programming Code
- Changing the Normal / Secure Code
- Changing the Normal / Bypass Code and Door Chime Settings
- Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time
- Defining the Auxiliary Input and Output
- Quick Reference Guide for Auxiliary Mode Setting
- Detailed Reference Guide
- Setting the Lockout Feature
- Setting the backlight behavior
- Enrolling Primary and Secondary Codes
- Deleting Primary and Secondary Codes
- Relay Codes Assignment
- Relay Code Assignment using Search Method
- Pin Code Length / Factory Default Settings
- Replacing a Lost Programming Code
- Replacing a Lost Normal / Secure Code
![](/manual/rosslare-enterprises/ayc-f60/user-s-manual-english/images/img-46.png)
Setting the backlight behavior
The controller allows you to define the way the units' Backlight will
work.
To define the Backlight operation:
1) Enter the programming mode.
Mode
Door
Green
Green
2) Depress 6 to enter Menu 6.
• The Mode indicator will flash green.
3) Construct a code using the following instructions:
the backlight and Led option and the type of activity are
• “50” - Backlight Off
• “51” - Backlight On (default)
• “52” - Backlight Off, activated on any key press for ten
seconds.
• “53” - Backlight Dimmed, backlight activated on any key
press for ten seconds.
4) Under Menu 6, format the controller using the following
instructions:
• “61” ASK
• “62” FSK
• “63” ASK + FSK (Default)
Enrolling Primary and Secondary Codes
Primary Codes
• Primary Codes can only be enrolled to an empty User Slot,
i.e. a slot where there is no existing Primary Code.
• Primary Codes must be unique, i.e. one user’s Primary
Code may not be the same as other users Primary Code.
• Primary Codes cannot be the same as any system codes,
such as the Normal / Secure Code or Lock Strike Code.
• Users who hold a Primary Code can gain entry only during
Normal mode.
Page 47
AYC-Qx4 family manual