User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Mounting
- 4. Wiring Instructions
- 5. Reader Operation
- 6. Proximity Operation
- 7. Keypad Operation Instructions
- 7.1 Programming Menu
- 7.2 Entering Programming Mode
- 7.3 Exiting Programming Mode
- 7.4 Selecting Keypad Transmission Format
- 7.5 Keypad Transmission Format Option Number
- 7.5.1 Option 1: Single Key, Wiegand 6-Bit (Rosslare Format)
- 7.5.2 Option 2: Single Key, Wiegand 6-Bit Nibble and Parities
- 7.5.3 Option 3: Single Key, Wiegand 8-Bit Nibbles Complemented
- 7.5.4 Option 4: 4 Keys Binary + Facility Code, Wiegand 26-Bit
- 7.5.5 Option 5: 1 to 5 Keys + Facility Code, Wiegand 26-Bit
- 7.5.6 Option 6: 6 Keys BCD and Parity Bits, Wiegand 26-Bit
- 7.5.7 Option 8: 1 to 8 Keys BCD, Clock & Data
- 7.5.8 Option 9: Single Key, Wiegand 4-Bit
- 7.6 Changing the Programming Code
- 7.7 Changing the Facility Code
- 7.8 Setting the Backlight Behavior
- 7.9 Return to Factory Default Settings
- 7.10 Replacing a lost Programming Code
- 8. OSDP Operation
- A. Wiegand Output Formats
- B. Limited Warranty
Proximity Operation
16 AY-G/H6xx0 Installation and User Manual
6. Proximity Operation
6.1 Supported Credential Technologies
O2S readers support reading from the secure memory of the
following credential technologies:
AY-H6x80 and AY-G6x80
MIFARE DESFire EV1 (2K, 4K, 8K)
MIFARE Classic (1K, 4K)
AY-H6x70 and AY-G6x70
MIFARE Plus X (2K, 4K)
MIFARE Plus S (2K, 4K)
MIFARE Classic (1K, 4K)
6.2 Wiegand Output
For O2S credentials, the reader outputs the ID data stored in the
secure memory (sector/file) of the credential. The ID data defines the
output as Wiegand and also determines the bit length of the output.
For example, when reading an O2S 26A format credential, the reader
outputs a Wiegand 26-Bit ID.
For non-O2S credentials, the reader outputs the CSN of the credential
as a Wiegand 32-Bit ID.