User's Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Mounting
- 4. Wiring Instructions
- 5. Reader Operation
- 6. Proximity Operation
- 7. Keypad Operation Instructions
- 7.1 Programming Menu
- 7.2 Entering Programming Mode
- 7.3 Exiting Programming Mode
- 7.4 Selecting Keypad Transmission Format
- 7.5 Keypad Transmission Format Option Number
- 7.5.1 Option 1: Single Key, Wiegand 6-Bit (Rosslare Format)
- 7.5.2 Option 2: Single Key, Wiegand 6-Bit Nibble and Parities
- 7.5.3 Option 3: Single Key, Wiegand 8-Bit Nibbles Complemented
- 7.5.4 Option 4: 4 Keys Binary + Facility Code, Wiegand 26-Bit
- 7.5.5 Option 5: 1 to 5 Keys + Facility Code, Wiegand 26-Bit
- 7.5.6 Option 6: 6 Keys BCD and Parity Bits, Wiegand 26-Bit
- 7.5.7 Option 8: 1 to 8 Keys BCD, Clock & Data
- 7.5.8 Option 9: Single Key, Wiegand 4-Bit
- 7.6 Changing the Programming Code
- 7.7 Changing the Facility Code
- 7.8 Setting the Backlight Behavior
- 7.9 Return to Factory Default Settings
- 7.10 Replacing a lost Programming Code
- 8. OSDP Operation
- A. Wiegand Output Formats
- B. Limited Warranty
Introduction
8 AY-G/H6xx0 Installation and User Manual
1. Introduction
The Open to Secure (O2S) family of readers are multi-format
contactless smart card readers for use in access control system
solutions.
The AY-x6x70 readers support reading O2S ID data and the CSN from
MIFARE Plus
®
and MIFARE
®
Classic credentials.
The AY-x6x80 readers support reading O2S ID Data and the CSN from
MIFARE
®
DESFire
®
EV1 and MIFARE Classic credentials.
O2S ID data is stored in the secure memory of the MIFARE credential.
O2S ID data is AES 128-bit encrypted during transmission to the
reader for MIFARE Plus and DESFire EV1 credentials.
1.1 Key Features
Contactless smart card reader (13.56 MHz)
Meets ISO14443 Type A Standard
AES 128-bit encryption during transmission (MIFARE Plus and
MIFARE DESFire EV1)
Reads O2S ID data from O2S credentials
Reads CSN of non-O2S credentials
Output formats:
Wiegand (outputs per format on the card)
OSDP via RS-485 (selected models)
RGB multi-color light indicator
Blue backlit tact switch keypad
Fully-potted construction for indoor and outdoor use
Optical back tamper sensor with OC output
Two LED control inputs
Buzzer control input
Hold feature (not in standard configuration)