User's Manual

Reader Functionality
AY-H6355BT Installation and User Manual 17
6. Reader Functionality
Upon power on, the unit flashes yellow, then blue, and then orange,
each for 1 second and a beep is heard for each color.
6.1 Standby Mode
The default mode of the reader is Standby mode. In Standby mode,
the unit is ready to receive data from an entered PIN code or from a
presented proximity card, NFC-ID, and BLE-ID.
When the reader is in Standby mode, both LEDs
are blue.
When a contactless card or an NFC-ID device is
presented or a keypad entry is being transmitted,
the right LED flashes green and you hear a beep.
When a BLE-ID device or smartphone app is
received by the reader, the right LED flashes yellow
and you hear two short beeps.
Keypad data can be sent via one of eight different keypad
transmission formats (see Section 6.2.3).
Proximity cards presented to the reader are sent in either various
Wiegand formats or Clock & Data format (see Section 6.2.4).
6.2 Programming
Programming is done solely via the unit's keypad driven Programming
Menu System. During the manufacturing process, certain codes and
settings are pre-programmed. These settings are called the default
factory settings.
Table 2 shows the names of all the reader menus.
Default factory settings are marked by a "*" sign.
blue blue
green blue
yellow
blue