User's Manual

Reader Functionality
AY-H6355BT Installation and User Manual 19
6.2.1 Entering Programming Mode
To reach the Programming Menu System, the unit must first be
placed into Programming mode.
• The factory 4-digit Programming code is 1234.
• If a Programming code is not entered within 20 seconds, the unit
returns to Standby mode.
To enter Programming mode:
1. Press # four times.
The left LED turns yellow and the right LED
turns off.
2. Enter your 4-digit Programming code.
If the Programming code is valid, the left LED
turns green.
If the Programming code is invalid, you hear a long beep and the
reader returns to Standby mode.
6.2.2 Exiting Programming Mode
To exit Programming mode:
1. Press # to exit Programming mode at any time.
 You hear a beep.
 Both LEDs are blue.
This indicates that the unit has returned to Standby mode.
Wrong entries may reset the reader back to Standby mode. If no
key is pressed for 20 seconds while in Programming mode, the
unit exits Programming mode and returns to Standby mode.
yellow
green
blue blue