Technical Specs

Table Of Contents

4. On the main screen, configure the following:

Option Remarks

Door Name Assign name to selected door reader

Password Change password

Firmware Allows firmware update over BLE from a list of available versions.

A small number of minutes is necessary to update the firmware. During this time, the mobile data link

must be stable. If the update procedure fails, the reader will continue to operate with the initial

firmware.

5. Tap Set Configuration and configure the following:

Parameter Options Remarks

Protocol Wiegand 26 bit, OSDP, OSDP-SC, Clock and Data

Wiegand: 26/26R, 32/32R, 34/34R,

40/40R, 56,56R, 64/64R bit

26 bit (default)

OSDP-SC: Install mode (read/write)

OSDP addresses: 0-31

13 (default)

Sector Off, Key A. xxxxxx

Off (default)

Key A: Must type 12 character key in Hex

format

Location:

• Sector [0-39]

• Block [0-14]

• Byte [0-15]

Credentials reading

standards

125 KHz EM (ASK)

125 KHz (FSK)

ISO 14443A

ISO 14443B

ISO 15693

NFC

BLE Credential

You can select multiple credentials.

All standards are selected by default.

When a sector is activated,

the ISO 14443A, ISO 1443B,

and ISO 18092 credential

reading standards are

automatically set to OFF. If

necessary, select a standard

again.

Multi-Smart™ Readers Installation & User Guide