Technical Specs

Parameter Options Remarks
Buzzer
Level
Off, High, Medium, Low.
High (default)
Credential read sound
• Off
• One short beep
• Two short beeps
• One long beep
• Customized
The following are customized options:
• On time
▪ Time - 200 msec (default)
• Off time
▪ Time - 200 msec (default)
• Cycles
▪ 1 (default)
7 Byte CSN - Ignore
first Byte
On/Off On (default)
5. NFC And BLE Operation
5.1. R osslare NFC-ID (Android)
Rosslare's NFC-ID read function for Multi-Smart™ Readers can read both active and passive NFC credentials. NFC-ID
can be generated from the Rosslare BLE-ID app for each NFC supported Android smartphone.
The reader scans for NFC-ID and transmits the ID number to the host controller via OSDP or Wiegand protocols.
5.2. R osslare BLE-ID
The reader can read credentials from Rosslare BLE-ID app via Bluetooth.
The reader scans for BLE-ID and transmits the ID number to the host controller via OSDP or Wiegand protocols.
BLE-ID credentials have a line-of-sight range of up to 12m (39 ft) from the reader depending on the type and brand of
smartphone or BLE device.
6. LED Operation
6.1. Normal Power Up
When power applied from OFF position, LED test will run for 1.5sec. (cycle all LED colors of the RGB for 500ms each
color in the following order: Red, Green, Blue), followed by 3 beeps.
Multi-Smart™ Readers Installation & User Guide
www.rosslaresecurity.com
7