User's Manual
Table Of Contents
- Table of Contents
- 1. Before Getting Started
- 2. Product Description
- 3. Environment Setting
- 4. How to Use Terminal
- 5. Troubleshooting
- 5.1. When the fingerprint authentication time is too long or fails:
- 5.2. When the fingerprint is not entered well:
- 5.3. When the RF card authentication fails:
- 5.4. When the network is not connected:
- 5.5. When the authentication is successful but the door does not open:
- 5.6. When the user is not registered:
- 5.7. When the product is unstable or does not work:
- Appendix 1. Glossary
- Appendix 2. Declaration of Conformity
- Appendix 3. Radio Equipment Directive (RED)
- Appendix 4. RoHS Directive
AY-B91x0BT User Guide
13
When clicking the “...” button, the detailed setting screen appears as shown below.
To change the terminal ID and network settings, select the terminal to set, enter the change value,
and click the “Modify IP” button. Then, you can check that the terminal value has been changed.
Set Terminal ID and Terminal Network and then click the “Request Connect” button at the bottom,
and the terminal appears as the unregistered status on the screen.
* For more details, please refer to the Rosslare Bio9000 Manual.