User's Manual
Table Of Contents
- Table of Contents
- 1. Before Getting Started
- 2. Product Description
- 3. Environment Setting
- 4. How to Use Terminal
- 5. Troubleshooting
- 5.1. When the fingerprint authentication time is too long or fails:
- 5.2. When the fingerprint is not entered well:
- 5.3. When the RF card authentication fails:
- 5.4. When the network is not connected:
- 5.5. When the authentication is successful but the door does not open:
- 5.6. When the user is not registered:
- 5.7. When the product is unstable or does not work:
- Appendix 1. Glossary
- Appendix 2. Declaration of Conformity
- Appendix 3. Radio Equipment Directive (RED)
- Appendix 4. RoHS Directive
AY-B91x0BT User Guide
14
4. How to Use Terminal
4.1. Authentication
4.1.1. Fingerprint Authentication
Place your finger on the fingerprint sensor. The fingerprint sensor lights on and receives
fingerprint input. Keep your finger on the fingerprint sensor until the light turns off completely.
4.1.2. Card Authentication
Place the card on the card sensor of the terminal.
4.1.3. Multiple Authentication
For users who have to be authenticated by the combination of authentication methods such as
“Card and Fingerprint”, if the first input authentication method is successful, the remaining
authentication method is performed.