User's Manual
Table Of Contents
- Table of Contents
- 1. Checking Before Use
- 2. Introduction
- 3. Configuration
- 4. How to use Terminal
- Appendix 1 Glossary
- Appendix 2 Declaration of Conformity
- Appendix 3 Radio Equipment Directive (RED)
- Appendix 4 RoHS Directive
AY-B9350 User Manual 63
4.3. Authentication
4.3.1. Face Authentication
▶ 1 to N identification
Set face position until guide line is changed to green, look at the camera when the
guide line becomes green and then stop movement for a moment to proceed with
authentication.
▶ 1 to 1 verification
As shown in the figure below, press [ID input] button to input ID first. After that, set
face position until guide line becomes green when face input message is displayed and
then look at the camera stopping movement for a while.
4.3.2. Fingerprint Verification
▶ 1 to N identification
When fingerprint is placed on the fingerprint sensor in the main screen, buzzer sounds
and the sensor lamp turns ON to receive fingerprint. Do not remove finger until lamp
of the fingerprint sensor is completely OFF.
▶ 1 to 1 verification
As shown in the figure below, press [ID input] button to input ID first, input fingerprint
when fingerprint input window is displayed and fingerprint sensor lamp is ON. Do not
remove finger until lamp of the fingerprint sensor is completely OFF and the following
fingerprint input window is closed.