Programming Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Installation
- 4. Operation
- 5. Programming
- 5.1 Entering the Programming Mode
- 5.2 Exiting the Programming Mode
- 5.3 Changing the Open Code
- 5.4 Changing the Auxiliary Code
- 5.5 Changing the Programming Code
- 5.6 Changing the Normal/Secure Code
- 5.7 Changing the Normal/Bypass Code
- 5.8 Setting Fail Safe/Secure Operation
- 5.9 Setting Auxiliary Modes
- 5.10 Setting the Lockout Feature
- 5.11 Setting the Backlight Behavior
- 5.12 Enrolling Primary and Secondary Codes
- 5.13 Deleting Primary and Secondary Codes
- 5.14 Relay Codes Assignment
- 5.15 Changing PIN Code Length/Factory Default Settings
- 5.16 Replacing a Programming Code
- 5.17 Replacing a Normal/Secure Code
- A. Declaration of Conformity
- B. Limited Warranty
Programming
AC-F/G4x Series Installation and Programming Manual 41
For example, 0312 means a Fail Secure Operation consisting
of a 3-minute siren and a 12-
second Lock Strike release time.
You hear three beeps.
The system returns to Normal mode.
5.9
Setting Auxiliary Modes
The default auxiliary setting is 2004.
Auxiliary Relay activation is subject to
the user’s Auxiliary
code assignment (excluding Shunt, which is activated by
all users). For more
details, see Section 5.14.
To set Auxiliary modes:
1.
Enter Programming mode.
2.
Press 6 to enter Menu 6.
The left LED flashes green.
Green
Green
Green
Green