Programming Manual
Table Of Contents
- 1. Introduction
- 2. Technical Specifications
- 3. Installation
- 4. Operation
- 5. Programming
- 5.1 Entering the Programming Mode
- 5.2 Exiting the Programming Mode
- 5.3 Changing the Open Code
- 5.4 Changing the Auxiliary Code
- 5.5 Changing the Programming Code
- 5.6 Changing the Normal/Secure Code
- 5.7 Changing the Normal/Bypass Code
- 5.8 Setting Fail Safe/Secure Operation
- 5.9 Setting Auxiliary Modes
- 5.10 Setting the Lockout Feature
- 5.11 Setting the Backlight Behavior
- 5.12 Enrolling Primary and Secondary Codes
- 5.13 Deleting Primary and Secondary Codes
- 5.14 Relay Codes Assignment
- 5.15 Changing PIN Code Length/Factory Default Settings
- 5.16 Replacing a Programming Code
- 5.17 Replacing a Normal/Secure Code
- A. Declaration of Conformity
- B. Limited Warranty
Introduction
AC-F/G4x Series Installation and Programming Manual 11
1. Introduction
The AC-F4x series and AC-G4x series access control units are
waterproof standalone controllers. All the units are suitable for
both indoor and outdoor mounting. The unit(s) accepts up to
500 users and allows entry via a personal identification number
(PIN) and/or by presenting a proximity card.
1.1
Controller Types
The different types of control units described in this manual are:
AC-F43 – PIN only
AC-F44 – PIN and proximity card
AC-G43 – Mullion-Box PIN only
AC-G44 – Mullion-Box PIN and proximity card
Relay
Current
Backlight
Keypad
Type
Proximity
AC-F43 2 A
3x4 Standard
AC-F44 2 A
3x4 Standard
AC-G43 2 A
2x6 Mullion
AC-G44 2 A
2x6 Mullion