Programming Manual

Table Of Contents

Controller Operation

36 AYC-Ex5/T65 Series Installation and Programming Manual

4.9 Programming as a Controller

Programming is done solely via the unit's keypad driven

Programming Menu System. To reach the Programming Menu

System, the unit must first be put into Programming mode (see

Section 4.9.1).

During the manufacturing process, certain codes and settings are

pre-programmed. These settings are the called the default factory

settings.

Table 4 shows the names of all the controller programming menus,

as well as all the default factory codes and settings for the units.

Table 4: Controller Programming Menu

No.

Menu Description Default

4 digits

digits

4-8 digits

1 Changing Lock Strike Code 2580 25802 258025 25802580

2 Change Auxiliary Code 0852 08520 085208 08520852

3 Changing Program Code 1234 12341 123412 12341234

4 Changing Normal/Secure

Code

3838 38383 383838 38383838

5 Changing Normal/Bypass

Code

N/A

6 Changing Door Release Time 0004

Define auxiliary

inputs/outputs

2004

Set Lockout 4000

Backlight Behavior 5100

7 Enrolling PIN Code N/A

8 Deleting PIN Code N/A

9 Code assignment with

strike/auxiliary

N/A

0 Return to factory defaults or

change PIN code Length

N/A