Specifications

Programming the HLX-40
28 HLX-40 Installer Manual
5. Programming the HLX-40
5.1 Overview
We recommend that you program HLX-40 before installing it. The system must
be connected to the AC power supply for programming; you may also connect
the backup battery at this time.
HLX-40 is provided with two default codes:
 Default installer code: 8888 – Enables you to program HLX-40
 Default Master code: 1234 – Enables you to change the master code and
modify the User and Master options
We recommend that you change the master and installer codes after first time
use.
5.2 Enrolling Wireless Devices and Remote Controls
You can enroll detectors, remote controls, keypads, sirens, and repeaters.
Enrolling is not available for Wired Zone #40. It can only be enabled or disabled
(default: disabled). Zone 40 uses the wired zone and tamper inputs.
Before enrolling wireless devices and remote controls, make sure they all
contain the appropriate batteries.