Operation Manual

- 22 -
STEP 2:
Take off the Cross pan bolt (20), Flat washer (21), Limit valves (24), Limit valves axis (40), then insert the slide
rest (18) onto the slide way (22), and then tighten slide rest (18) by Cross pan bolt (20), Flat washer (21), Limit
valves (24), Limit valves axis (40).
STEP 3:
Tighten the stand rail (29) to the Slide way (22) with Hexagon bolt (25), Flat washer (8), Nylon nut (16). Then
tighten the protective guard (28) to the Stand rail (29) with Cross pan bolt (27), lock the Stand rail (29) to the
L-shape connection strap (78) with Knob (2).
STEP 4.
Connect the Sensor wire (46) and the Sensor splice (36), then insert the Stay pipe (66) to the Slide way
(22),Then tighten the slide way (22) to the mainframe (1) with hexagon bolt (14) Flat washer (8) Nylon nut (9)
and put the cap (70).At last lock it by Knob (2) and Flat washer (35)