Operation Manual

GB-23
ENGLISH
Parts list · Assembly
No. Name Size Quantity
1 Vibration plate 1
2 Vibration damping buffer 4
3 Hand strap cover 2
4 Hand strap brace 2
5 Eyelet for hand strap 2
6 Base plate 1
7 Rail 1
8 Receiver/Display 1
9 Transport roll 2
10 Aluminium cover 4
11 Damping mat 1
12 Motor 1
13 Cable clip 1
14 Remote control 1
15 Self-locking screw 3,5 x 15 1
16 Screw M10 4
17 Washer M10 4
18 Sticker 4
19 Screw M6 x 10 4
20 Washer M8 4
21 Spacer disc M8 4
22 Screw M8 x 30 4
23 Screw M10 x 35 4
24 Screw M6 x 35 3
25 Spacer disc M6 5
26 Washer M6 5
27 Screw M5 x 10 1
28 Screw M6 x 30 2
29 Socket for mains plug 1
30 Self-locking screw 3,5 x 15 4
31 Self-locking screw 3,8 x 30 1
32 Motor damper 4
33 Transport handle 1
34 Rubber dampers 4
35 Mains adapter 1
36 Holding strap 2
37 Controller 1
38 Connecting cable 1 1
39 Cable connection 1
40 Connecting cable 2 1
Assembly
The vibrating plate is largely pre-assembled.
1. Attach the holding straps (36).
2. Establish the power supply using the mains adapter (35)
and the socket (29) at the rear of the machine.
3. Insert both batteries (type AAA, 1.5 V) into the remote
control.
The machine is ready to operate.
Make sure your workout area is not slippery and that
you have enough room around the equipment. We re-
commend a radius of at least 1.5 metres. Also, remove
all sharp-edged objects nearby.
WARNING
REX_Trainer_VX200_12.indd GB-23REX_Trainer_VX200_12.indd GB-23 10.05.12 16:1110.05.12 16:11