Installation Guide

Step 1 Faucet and pop-up installation
3
2
1
Step 2 Checking and testing
Faucet installation
HOT
COLD
1/2”( 13mm)IPS
WARNING:
DON'T OVERTIGHTEN!
4
2.Position the handle in installation surface as shown and secure it with fixing kit and tighten the screw with
screwdriver. Repeat the above steps for the other handle.
Caution: please be caution with the position of hot and cold handles.
3.Position the flexible hose as shown and fix it to the faucet as shown with clamp spring.
Warning: The water supply valve mentioned above are not included, please purchase them from plumbshop.
4.Connect the water supply lines to faucet and water supply valve and tighten it with wrench.
1.Position the body with o-ring in the installation surface as shown and secure it with gasket assembly and tighten
the lock nut with adjustable wrench.
2
2.Check all connections at arrows for leaks, re-tighten it if necessary.
BUT DON'T OVERTIGHTEN
Step 3 Cleaning and care
Daily cleaning and care are required in order to keep the product shining and
properly working.
1
2
3
4
Clean it with water and dry it with soft cloth.
Clean the product with gentle liquid or glass cleaner.
Don't use acid cleaner.
Don't clean with abrasive material, abrasive paper or knife.
1
1.Remove the aerator by aerator wrench. Turn the faucet handle all the way on, turn on hot and cold water supply
and flush water lines for one minute. Reinstall aerator by aerator wrench.