i-
R1 6.5" / 8" Speaker Installation Instructions www.ro swellmarine.com RO· ,WEL.L. Welcome to the family. Thank you for purchasing the best marine speakers in the world. After years of development and testing, we are proud to introduce the R1 Series marine speakers, built to outlast - and outperform every other marine speaker on the market. We at Roswell started a revolution in the wakeboard industry back in 1998, and have since expanded into marine audio and other branches of the marine industry.
R1 6 .5" / 8" Speaker Installation Instructions www.roswellmarine.com - - - - - A - --------, DESCRIPTION 6.5" SPECS 8"SPECS A (overall diameter) 6.81" I 173 mm 9.21" I 234 mm B (mounting depth) 3" /76 mm 3.325" I 85 mm 1.2" I 30 mm 1.5" I 38 mm D (basket diameter) 5.25" I 133 mm 7.
R1 6.5" / 8" Speaker Installation Instructions www.roswellmarine.com PACKAGE CONTENTS @ @ ~ ~ A x2 B x2 C x1 D x8 E x1 R1 Series Speakers Locking trim rings Cut out template Hex-head stainless screws 3mm hex-head bit i 8 PREPARATION For safety, turn off the audio system and battery switch prior to beginning installation. If your vessel does not have a battery switch, simply disconnect the negative lead from the battery terminal.
R1 6.5" / 8" Speaker Installation Instructions www.roswellmarine.com TOOLS REQUIRED Dust Mask Safety Glasses Power Drill -====r: I I Masking Tape Jigsaw/ Air-saw c Center Punch Pen/ Pencil Wire Strippers / Crimps ,Q]===J II 17 17 IJ Countersink Bit 1/8" & 3/8'' Drill Bit 18 AWG (Red} Heat Shrink Butt Splices (if not using the OEM quick-connect} INSTRUCTIONS Follow these illustrated steps to ensure proper installation of your R1 Series Speakers.
R1 6.5" / 8" Speaker Installation Instructions www.roswellmarine.com Remove the trim ring from the speaker first {refer to step G, turning in a counterclockwise direction instead). Place the speaker into the mounting cutout to ensure it will fit. Remove additional material if needed. Once th~ speaker fits properly, align the speaker to the desired orientation and use a center punch or pencil to mark the mounting holes for the screws to secure the speaker.
R1 6.5" / 8" Speaker Installation Instructions www.roswellmarine.com Using the included hex-head bit. secure the speaker to the mounting location using (4) hex-head screws per speaker. i c------- Install the trim ring by orienting the tabs and logo recess in the ring with the corresponding locations on the grill, fully inserting each tab and then gently rotating the ring into place by turning it in a clockwise motion. turn trim clockwise to lock RECOMMENDED CROSSOVER SETTINGS 6.
R1 6.5" / 8" Speaker Installation Instructions www.roswellmarine.com USE AND CARE These speakers are built to the highest standards of marine durability. However; they are still a sensitive piece of electronic equipment. When cleaning, avoid hosing down the speakers directly. Simply wiping the speaker down with a damp cloth should be sufficient to ensure years of enjoyment.
