Owner's Manual

R16.5" Tower Speaker Installation Instructions
1) Use wire strippers to expose 1 /4" of wire on all wires.
2) Connect the tower wires to the speaker wiring harness
according to the LED configuration you plan to use.
3) Heat shrink the connectors.
4) Carefully push the wires back into the tubing .
x2 <
a~
x12 ~
orx8 \
I
Determine your mounting location on your tower. If you
are mounting the speakers so they face directly
rearwards or perpendicular to whatever tube they are
clamped to please skip ahead to step I.
Rotated mounting
To access the bolts that hold the clamp in
place you must first remove the speaker.
Remove the rear bolt, slide the speaker out of
the can and then unplug the wiring harness.
Set the speaker aside somewhere safe where
it won't get knocked over or scratched.
r
7/32"
www.roswellmarine.com
----------- ·- Speaker Harness
-------------· Deutsch Connector
If your mounting location requires a rotated clamping
position proceed to step E.
Square mounting
5
,__ __________________ ROSWF L.L.