Owner's Manual

Rl 6.5" Tower Speaker Installation Instructions
1. Remove the two 3/8n-16 bolts from the clamp top .
2. Remove the two plastic clamp inserts from the clamp.
3. Remove the four 3/8"-16 bolts from inside the speaker
can.
1.
r
5/16"
1. Rotate the clamp body to the angle required for your
installation.
2. Re-install the 3/8"-16 bolts through the internal
spacer, can, outer spacer, plastic spacer and into the
clamp angle insert with red threadlock and tighten to
25ft-lbs.
~ i r ,__2_5-ft--1-bs~
Re-install the speaker assembly. First plug in the wiring
harness, place the speaker in the can being mindful to
align the slot at the top of the speaker assembly with
the alignment pin in the can. Then install the counter-
sunk 3/8"-16 screw with red threadlock. Tighten to
25ft-lbs.
~ if ,_____25ft-lbs
www . roswellmarine.co:n
3.
1.
Note alignment pin
©-------------- (-/ ___ i-<C>SL!.Jf L.L.