Owner's Manual

Rl 8" Tower Speaker Installation Instructions
Measure the tubing you will be mounting . '
your speakers to and select the appropriate
plastic insert for your tubing diameter. Place
your plastic insert into the clamp
1. Remove the safety lanyard from the speaker can.
2. Wrap the safety lanyard around the tower tube you will
be mounting your speaker to and thread the lanyard
through its loop on the end to make a self tightening loop.
3. Re-attach the safetly lanyard to the speaker. Apply blue
thread lock to the screws and tighten.
2.
BLUE 3/32"
Open clamp, position speaker in desired mounting
location, close clamp and install the two 3/8" -16
screws with red threalock and tighten boltS;to 30ft-lbs
to lock speaker in place. ~-------,r-----~~JfJf::--
~ L[-3-0-ft--lb-s~
www.roswellmarine.com
1 i,-------------------ROSWE L.L.