Owner's Manual

Rl 8" Tower Speaker Installation Instructions
1) Use wire strippers to expose 1 /4" of wire on all wires.
2) Connect the tower wires to the speaker wiring harness
according to the LED configuration you plan to use .
3) Heat shrink the connectors.
4) Carefully push the wires back into the tubing.
x2 <
□ ~
x1 2 ~
or x8 \
•
Determine your mounting location on your tower. If your
- mounting location-r-ef!uires a rotate.d-clamping position ,.. .
proceed to step E.
Rotated mounting
To access the bolts that hold the clamp in place you must
first remove the speaker. Remove the trim ring, unscrew the
4 phillips head speaker mounting screws, slide the speaker
out of the can and then unplug the wiring harness. Set the
speaker aside somewhere where it won 't get knocked ovN
or scratched.
www.roswellmarine . com
--------- Tower Wires
rt ei · ,,; "'
k 1/lli[/.. Lf --------- Connectors
------ ------ Speaker Harness
-- ---------- -· Deutsch Connector
If you are mounting the speakers so they face directly
-- rearwards or per.pendicular to ,whatever tube they are -
clamped to please skip ahead10 step I.
Square mounting
-- ------------
51-----------------------------
ROSWf L.L.