i-
R110" / 12" Speaker Installation Instructions www.roswellmar ine.com i-
R110 "/ 12" Speaker Installation Instructions A-- 1 11 1 1 cid[~ u rs 1 11 I www.roswellmarin e com 11 u 1------------::iE--~ D 1 C DESCRIPTION lO" SPECS 12" SPECS A (overall diameter) 10.85" I 275 mm 12.81" I 325 mm B (mounting depth) 5.08" I 129 mm 6.38" I 162 mm 1.94" I 49 mm 2.12" I 54 mm 9.25" I 235 mm 11.
R110" / 12" Speaker Installation Instructions www.roswellmarine.com PACKAGE CONTENTS ~ ~ A xl B x8 C xl D x8 Series Subwoofer Screw Covers Cut out template #10 X 175" (10") R1 #10 X 2.0" (12") Stainless Screws PREPARATION For safety, turn off the audio system and battery switch prior to beginning installation. If your vessel does not have a battery switch, simply disconnect the negative lead from the battery terminal.
R110 "/ 12" Speaker Installation Instructions www.roswellmarine.
R110" / 12" Speaker Installation Instructions www.roswellmarine.com ENCLOSURE SPECIFICATIONS 12" Ported Enclosure Load Volume Port0 Port Length F-3 Ported 42L (l.50ft3) 10cm (4.0 ") 27.5cm (10.875") 40Hz Ported 56L (2.00ft3) 10cm (4.0") 19.5cm (7.625") 40Hz Ported 70L (2.50ft3) 10cm (4.0") 19.5cm (7.625") 35Hz 10" Ported Enclosure Load Volume Port0 Port Length F-3 Ported 28L (1.00ft3) 10cm (4.0") 45cm (17.75") 40Hz Ported 42L (1.50ft3) 10cm (4.0") 27.5cm (10.
R110,../ 12" Speaker Installation Instructions www.roswellmar i ne.com INSTRUCTIONS Follow t hese illustrated steps to ensure proper installation of your R1 Series Speakers. Note: Required tools for each step are listed in the left column under each steps letter. Locate a suitable area to mount the speaker in your vessel. Ensure the area is large enough to evenly mount the speaker and grill. Ensure the area behind the mounting area is spacious enough to allow proper fit and air flow.
R110 111 / 12" Speaker Installation Instructions 5/32" www.roswellmarine.com Remove the screw covers from the subwoofer first. Place the sub into the mounting cutout to ensure it will fit. Remove additional material if needed. Once the sub fits properly, align the sub to the desired orientation and use a center punch or pencil to mark the mounting holes for the screws to secure the sub. Remove sub from the cutout and drill the holes with a 5/32" drill bit.
R110'"'/ 12n Speaker Installation Instructions www.roswellmarine.com Connect the main power wires to the subwoofer. Tighten the wire screws down with a phillips or flat head screwdriver. Red(+) Using a #2 phillips screw driver secure the subwoofer to the mounting location using (8) phillips-head screws per speaker. ~ x8 -- -- -- e::====" - - e::===="-- -- Snap in the eight screw covers. ROSWf L.L.
R110 111 / 12" Speaker Installation Instructions www. roswe l lma rin e.co m USE AND CARE This subwoofer is built to the highest standards of marine durability. However, it is still a sensitive piece of elect ronic equipment. When cleaning, avoid hosing dow n the subwoofer directly. Simply w iping the subwoofer dow n with a damp cloth should be sufficient to ensure years of enjoyment.
