i-
1-<1 b.oxb.o vamp ~pin ~peaKer InstaLLatIon 1nstructIons www. ros w ellmarine.com ROSWf-L.L. Welcome to the family. Thank you for purchasing the best marine speakers in the world . Roswell's classic Vamp Spin speakers are back and better than ever, featuring our premium Rl speakers, RGB LED's, and other improvements that will help your new Vamp Spins look, sound, and hold up better than ever before.
R1 6.5x6.5" Vamp Spin Speaker Installation Instructions w ww.rosw ellmarine.com PACKAGE CONTENTS ~ ~ (x2) Wiring Harness @ o @. 0 ~2~ I ' x2 I Port Speakers Starboard Speakers (x2) Safety Lanyard ~ ~~ ' ' x2 TOOLS & SUPPLIES NEEDED g1 0 ©~ ~~ W ! Ji ~ 8 "' .ii I : ' !"' - x4 x12 x2 © ., '' -"' ' ~ ' "' x2 x4 __ 1_-~
R1 6.5x6.5" Vamp Spin Speaker Installation Instructions www.roswellmarine.com Wiring options for RGB LEDs Before starting assembly you will need to consider the LED configuration you would like to use .. You can wire the RGB LEDs in your speakers to be either one fixed color, or your can wire them to be used with the Roswell RGB Controller (Part Num. C920-1620). Connecting the wires on the speaker wiring harness in different configurations will produce different colors.
R1 6.5x6.5" Vamp Spin Speaker Installation Instructions Remove the #6 tapping screw, washer and safety lanyard from the speaker. Set these aside for later. • www.roswellmarine.com Determine your mounting location on your tower and note the tubing size for that location. Roughly check to estimate speaker clearance in this location. 3.5" clearance for spin speaker Connect the included wiring harness to the wiring on your tower/boat. 1) Use wire strippers to expose 1/4" of wire on all wires.
Rl 6.5x6.5" Vamp Spin Speaker Installation Instructions www.roswellmarine.com Mount the speakers to the tower. Apply some red threadlock to the screws. Tigthen to 25ft-lbs. If necessary rotate your speaker at the clamp to whatever angle you like and then tighten the 4 set screws. Note: This step is easier with two people! Wrap the safety lanyard cable around the tube the speaker is mounted to. Thread one end of the lanyard through one loop.
Rl 6.5x6.5" Vamp Spin Speaker Installation Instructions www.roswellmarine.com Use & Care These speakers are built to the highest standards of marine durability. However, they are still a sensitive piece of electronic equipment. When cleaning, avoid hosing down the speakers directly and do not use harsh cleaners on the R1 's as they could damage the finish. Simply wiping the speaker down with a damp cloth should be sufficient to ensure years of enjoyment.
