Owner's Manual

Rl 6.5x6.5" Vamp Spin Speaker Installation Instructions
www.roswellmarine.com
'
'
'
x2
Mount the speakers to the tower. Apply some red
threadlock to the screws. Tigthen to 25ft-lbs. If
necessary rotate your speaker at the clamp to
whatever angle you like and then tighten the 4 set
screws.
Note: This step is easier with two people!
Mou' nt the safety lanyard to the speaker and add the
set screw to the clamp top to lock the speaker into
place. Use the long set screw for 2.375" and 1.90 "
tubes. Use the short set screw for 3.00"tubes.
Note: Double check clearance before adding the
setscrew!
Enjoy your Roswell
Vamp Spin Speakers!
Wrap the safety lanyard cable around the tube the
speaker is mounted to. Thread one end of the
lanyard through one loop.
Connect your wiring harnesses to your speaker.
Push the connectors in until you hear a click.
s ,__ __________________ i-<.OSWf L.L.