Specification Sheet

SPECIFICATIONS
www.rotel.com
STEREO INTEGRATED AMPLIFIER
A12MKII
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Maximum Power Output
Continuous Power Output
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7k Hz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20k Hz, 8 ohms)
Input Sensitivity / Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Input Overload
Phono Input (MM)
Line Level Inputs
Preamplifier Output /
Impedance
Tone Controls - Bass / Treble
Signal to Noise Ratio
(IHF A-weighted)
Phono Input (MM)
Line Level Inputs
120 watts/ch (4 ohms)
60 watts/ch (8 ohms)
< 0.018%
< 0.03%
20 Hz - 20k Hz (0 ± 0.5 dB)
10 Hz - 100k Hz (0 ± 0.5 dB)
220
3.4 mV / 47k ohms
230 mV / 24k ohms
50 mV
4 V
1.2 V / 470 ohms
± 10 dB at 100 Hz / 10k Hz
90 dB
100 dB
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF A-weighted)
Input Sensitivity / Impedance
Preamplifier Output Level
Coaxial / Optical Digital Signals
PC-USB
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
BTU (4 ohms, 1/8th power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
Finish
10 Hz - 90k Hz (0 ± 2 dB, Max)
103 dB
0 dBfs / 75 ohms
1.4 V (at -20 dB)
SPDIF LPCM
(up to 24-bit / 192k Hz )
USB Audio Class 1.0
(up to 24-bit / 96k Hz )
USB Audio Class 2.0
(up to 32-bit / 384k Hz )*
*Driver installation required
Roon Tested
230 V, 50 Hz
120 V, 60 Hz
230 watts
< 0.5 watts
632 BTU/h
430 x 93 x 345 mm
17 x 3 5/8 x 13 1/2 in
80 mm, 3 1/8 in
8.76 kg, 19.31 lbs.
Silver and Black