Info Sheet

Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T +1 978 664 3820
F +1 978 664 4109
www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T +44 (0) 1903 221 763
F +44 (0) 1903 221 525
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
The RA-1062 is the evolution of Rotel’s highly regarded
RA-1060. The design team spent hundreds of hours
evaluating individual component performance from input
to output. Chief among these improvements is the UK
designed and manufactured T-Network power supply
capacitor. These premium grade components follow the
tradition of our Slit Foil capacitors by incorporating tiny
perforations in the capacitor foil to reduce distortion. Even
more signicantly, the T-Network capacitor has multiple
connections that effectively create several smaller capacitors
Continuous Power Output 60 watts/channel
(20-20 kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion
(20Hz-20kHz)
< 0.03% at rated power,
1/2 power, or 1 watt
Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
< 0.03% at rated power,
1/2 power or 1 watt
Frequency Response
Phono Input
Line Level Inputs
20Hz-15kHz, ±0.2dB
10Hz-100kHz, +1, –3dB
Damping Factor
(20-20,000 Hz, 8 ohms)
150
Line Input Sensitivity /
Impedance
160 mV / 24 kohms
Tone Control
Bass
Treble
+3-4dB at 100 Hz
+3dB at 10kHz
Line Input Overload 5 V
Phono (MM) Sensitivity /
Impedance
2.4mV / 47 kohms
Input (Phono) Overload 170 mV
Preamplier Output /
Impedance
1V / 470 ohms
Signal to Noise Ratio
(IHF “A” weighted)
>95 dB
Power Requirements
USA:
EC:
115 Volts, 60 Hz
230 Volts, 50 Hz
Power Consumption 300 Watts
Dimensions (W x H x D) 433 x 92 x 334mm
17
1
/
8
x 3
5
/
8
x 13
1
/
8
in
Front Panel Height 80mm / 3
1
/
16
in
Weight (net) 7.8 kg, 17.2 lbs.
within a single larger body and thus ensure far lower voltage
intermodulation between input and output. The result is a
striking portrayal of musical subtleties supported by a deep,
well dened and accurate bass-line.
The RA-1062 includes a MM phono stage with inputs for
Tuner, Tape 1 and 2, CD, and Aux. A 12 volt trigger, IR
remote input, speakers A & B selector, headphone output,
balance control, contour switch round out the features of
this superbly capable integrated amplier.
RA 1062
High Current Stereo Integrated Amplier
Description
Specications

Summary of content (1 pages)