Info Sheet

Maximum Power Output
Continuous Power Output
Total Harmonic Distortion
Intermodulation Distortion
(60 Hz : 7k Hz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20k Hz, 8 ohms)
Input Sensitivity / Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Input Overload
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Preamplifier Output /
Impedance
Signal to Noise Ratio
(IHF A-weighted)
Phono Input (MM)
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF A-weighted)
Input Sensitivity / Impedance
Preamplifier Output Level
Coaxial / Optical Digital Signals
PC-USB
Power Requirements
Europe
USA
Power Consumption
Standby Power Consumption
Normal
Network Wakeup
BTU (4 ohms, 1/8th power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
Finish
SPECIFICATIONS
350 watts/ch (4 ohms)
200 watts/ch (8 ohms)
< 0.008%
< 0.03%
20 Hz - 20k Hz (0 ± 0.5 dB)
10 Hz - 100k Hz (0 ± 0.5 dB)
600
5.2 mV / 47k ohms
340 mV / 100k ohms
540 mV / 100k ohms
52 mV
3.5 V
5.5 V
1.9 V / 100 ohms
80 dB
103 dB
10 Hz - 90k Hz (0 ± 2 dB, Max)
102 dB
0 dBfs / 75 ohms
1.43 V (at -20 dB)
SPDIF LPCM
(up to 24-bit / 192k Hz )
USB Audio Class 1.0
(up to 24-bit / 96k Hz )
USB Audio Class 2.0
(up to 32-bit / 384k Hz )*
*Driver installation required
MQA and MQA Studio
(up to 24-bit / 384k Hz )
230 V, 50 Hz
120 V, 60 Hz
500 watts
< 0.5 watts
< 2 watts
1239 BTU/h
431 x 144 x 425 mm
17 x 5 7/8 x 16 in
3U (132.6 mm, 5 1/4 in)
17.63 kg, 38.87 lbs.
Silver and Black
www.rotel.com
STEREO INTEGRATED AMPLIFIER
RA-1592MKII
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Being Roon Tested means that Rotel and Roon have collaborated to ensure you
have the best experience using Roon soware and the Rotel equipment together, so
you can just enjoy the music.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.