Specifications

SPECIFICATIONS
www.rotel.com
STEREO INTEGRATED AMPLIFIER
RA-6000
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
MQA and the Sound Wave Device are registered trade marks of MQA Limited.© 2016
Being Roon Tested means that Rotel and Roon have collaborated to ensure you
have the best experience using Roon soware and the Rotel equipment together, so
you can just enjoy the music.
Maximum Power Output 350 watts/ch (4 ohms)
Continuous Power Output 200 watts/ch (8 ohms)
Total Harmonic Distortion < 0.0075%
Intermodulation Distortion < 0.03%
(60 Hz : 7kHz, 4:1)
Frequency Response
Phono Input 20 Hz - 20k Hz, 0 ± 0.5 dB
Line Level Inputs 10 Hz - 100k Hz, 0 ± 0.5 dB
Damping Factor 600
(20 Hz - 20 kHz, 8 ohms)
Input Sensitivity / Impedance
Phono Input (MM) 5.2 mV / 47k ohms
Line Level Inputs (RCA) 340 mV / 5.6k ohms
Line Level Inputs (XLR) 540 mV / 100k ohms
Input Overload
Phono Input (MM) 52 mV
Line Level Inputs (RCA) 3.5 V
Line Level Inputs (XLR) 4.5 V
Preamplifier Output / Impedance 1.9 V / 100 ohms
Signal to Noise Ratio
(IHF A-weighted)
Phono Input (MM) 80 dB
Line Level Inputs 103 dB
Digital to Analog Converters Texas Instruments
Digital Section
Frequency Response 10 Hz - 90k Hz (0 ± 2 dB, Max)
Signal to Noise Ratio (IHF A-weighted) 102 dB
Input Sensitivity/Impedance 0 dBfs / 75 ohms
Preamplifier Output Level 1.43 V (at -20 dB)
Coaxial/Optical Digital Signals SPDIF LPCM
(up to 24-bit / 192k Hz)
PC-USB USB Audio Class 2.0
(up to 32-bit / 384k Hz )*
*Driver installation required
Support MQA and MQA Studio
(up to 24-bit / 384k Hz )
Roon Tested
Power Requirements
USA 120 V, 60 Hz
EC 230 V, 50 Hz
Power Consumption 500 watts
Standby Power Consumption
Normal < 0.5 watts
Network Standby < 2 watts
BTU (4 ohms, 1/8th power) 1239 BTU/h
Dimensions (W x H x D) 431 x 144 x 425 mm
17 x 5
7
/
8
x 16 ins
Front Panel Height 3U / 132.6 mm / 5
1
/
4
ins
Weight (net) 18.81 kg, 41.47 lbs.
Finish Silver and Black