Info Sheet

Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]
www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
The RB-1080 rests close to the pinnacle of Rotel’s two channel power amplier offerings. Power output (200 watts per
channel into 8 ohms) is extraordinary. The Rotel-made toroidal transformer feeds separate power supplies for each channel.
British BHC Slit Foil storage capacitors provide quick charge/discharge times for instantaneous response to the most
demanding signal peaks. Damping factor, at 1,000, shows this amplier’s unparalleled ability to lock onto the most difcult
speakers to precisely control diaphragm motion and give you superior sound quality. Heavy duty dual binding posts encourage
the use of the most advanced speaker cables while switchable balanced (XLR) and unbalanced (RCA) inputs provide
extraordinary system conguration exibility. Front panel heat sinks add a strikingly dramatic look. Separate inputs and
outputs for 12 volt “trigger” signals and a detachable AC cord make this amplier well suited for custom-installed systems
with total remote control capability.
Power Congurations: 2 x 200 watts
Watts/Channel:
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
200 watts
THD (20-20,000Hz):
cont. rated power
one-half rated power
one watt per channel
0.03%, maximum
0.01%, maximum
0.02%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1): 0.03%, maximum
Damping Factor (8 ohms): 1000
Input Sens. / Impedance: 1.5V / 32 kohms
Frequency Response: 15-100 kHz (±1dB)
S/N Ratio (IHF A): 116dB
Power Consumption: 550 watts
Dimensions (W x H x D): 433 x 140 x 380mm
17
1
/
8
x 5
1
/
2
x 15”
Front Panel Height: 127 mm, 5.0”
Weight (net): 16.7 kg / 36.8 lbs
RB 1080
High Current Two Channel Amplier
Description
Specications