RS232 Protocol

10
Command:
get_display_update!
Description:
Request display update
Return String(s):
display_update=auto! / display_update=manual!
Return Description:
Status of if the display refresh is automatic or manual
Example:
display_update=auto!
Command:
get_current_power!
Description:
Request current power status
Return String(s):
power=on! / power=standby!
Return Description:
Current power status
Example:
power=on!
Command:
get_current_source!
Description:
Request current source
Return String(s):
source=cd! / source=coax1! / source=coax2! / source=opt1! / source=opt2! /
source=tuner! / source=phono! / source=usb! / source=pc_usb! /
source=aux1! / source=aux2! / source=bal_xlr! / source=bluetooth!
Return Description:
Current source
Example:
source=pc_usb!
Command:
get_tone!
Description:
Request current tone control state
Return String(s):
tone=on! / tone=off!
Return Description:
Current tone control state
Example:
tone=off!
Command:
get_bass!
Description:
Request current bass level
Return String(s):
bass=###! (+01-10, -01-10, 000)
Return Description:
Current tone control bass level
Example:
bass=+02!
Command:
get_treble!
Description:
Request current treble level
Return String(s):
treble=###! (+01-10, -01-10, 000)
Return Description:
Current tone control treble level
Example:
treble=-01!
Command:
get_balance!
Description:
Request current balance setting
Return String(s):
balance=###! (L01-15, R01-15, 000)
Return Description:
Current balance setting
Example:
balance=L03!