Owners Manual

16
RC‑1572MKII Stereo Control Amplier
Specications
Total Harmonic Distortion (20 Hz - 20 kHz) < 0.004%
Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.004%
Input Sensitivity / Impedance
Phono Input (MM) 3 mV / 47k ohms
Line Level Inputs (RCA) 200 mV / 100k ohms
Line Level Inputs (XLR) 300 mV / 100k ohms
Input Overload
Phono Input 63 mV
Line Level Inputs (RCA) 4 V
Line Level Inputs (XLR) 5 V
Output Level
Line Level (RCA) 1 V
Balance (XLR) 2 V
Frequency Response
Phono Input 20 Hz - 20k Hz, + 0.3, -- 0.2 dB
Line Level Inputs (RCA) 10 Hz - 100k Hz, + 0, -- 0.2 dB
Line Level Inputs (XLR) 10 Hz - 100k Hz, + 0, -- 0.2 dB
Tone Controls
Bass ± 10 dB at 100Hz
Treble ± 10 dB at 10kHz
Signal to Noise Ratio (IHF “A” weighted)
Phono Input 80 dB
Line Level Inputs (RCA) 118 dB
Line Level Inputs (XLR) 118 dB
Channel Separation
Phono Input > 85 dB
Line Level Inputs (RCA) > 85 dB
Line Level Inputs (XLR) > 75 dB
Digital Section
Frequency Response 20 Hz - 20k Hz (0 ± 0.5dB Max)
Signal to Noise Ratio (IHF ”A” weighted) 100 dB
Input Sensitivity / Impedance 0 dBfs / 75 ohms
Preamplifier Output Level 1.44V (at -- 20dB)
Coaxial/Optical Digital Signals SPDIF LPCM
(up to 192k Hz 24 bit)
PC-USB USB Audio Class 1.0
(up to 96k Hz 24 bit)
USB Audio Class 2.0
(up to 384k Hz 32bit)*
*Driver installation required
MQA and MQA Studio
(up to 384k Hz 24bit)*
Roon Tested
General
Power Requirements:
USA: 120 volts, 60 Hz
EC: 230 volts, 50 Hz
Power Consumption 35 watts
Standby Power Consumption
Normal < 0.5 watts
Network wakeup < 2 watts
BTU (4 ohms, 1/8 power) 65 BTU/h
Dimensions (W x H x D) 431 x 99 x 338 mm
(17 x 3
7
/
8
x 13
1
/
4
ins)
Front Panel Height 2U (88.1 mm, 3
1
/
2
ins)
Weight (net) 8.4 kg, 18.5 lbs.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hi-Fi logo are registered trademarks of The Rotel Co., Ltd, Tokyo,
Japan.
“Made for iPod,” and “Made for iPhone,” means that an electronic accessory
has been designed to connect specically to iPod or iPhone, respectively, and
has been certied by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with
safety and regulatory standards. Please note that the use of this accessory
with iPod, or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.