Owners Manual

20 13
RDV-1040 DVD Player
NOTES:
The RDV-1040 does not support “packet
writing (UDF format)” discs.
The RDV-1040 does not support the ID3
tag.
The RDV-1040 supports discs recorded
with multiple sessions.
Some discs may not play due to disc char-
acteristics or recording conditions.
Programmed and random playback func-
tions do not work with MP3/WMA discs.
For MP3, the RDV-1040 only can play
back tracks with the following file exten-
sions; “.MP3,” “.Mp3,” “.mp3” and
“.mP3.”
For WMA, the RDV-1040 only can play
back tracks with the following file exten-
sions; “.WMA,” “.wma,” and any other
combination of upper case and lower case
letters (such as “.Wma”).
Time required for reading the disc con-
tents may vary for different discs, depend-
ing on the numbers of groups (folders) and
tracks (files) recorded, etc.
You cannot advance or reverse playback
by pressing
29
or
10
, or by
holding down
26
or
8
during
MP3/WMA disc playback.
The RDV-1040 supports WMA files re-
corded with a bit rate of 48 kbps or higher.
The RDV-1040 cannot play back WMA files
recorded with a bit rate under 48 kbps.
Selecting a Group and Track
When inserting an MP3/WMA disc, after the
disc contents are read, the MP3/WMA CON-
TROL display automatically appears on the TV
screen. You can select a group/track from the
display using the following procedure.
1 Make sure that the black (cursor) bar is in the
left (group) column. If it is in the right column,
press  to move it to the left column.
2 Press / to move the bar to a desired
group. On the right column, tracks in the
selected group are shown.
3 Press
8
or
26
to select a de-
sired track, then press ENTER
34
or
(PLAY)
28
.
or
Press the numeric buttons
4
to directly
specify a desired track number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
The RDV-1040 starts playback from the selected
track.
You can also select a desired track by press-
ing  to move the black bar to the right (track)
column then using /.
NOTES: If an MP3/WMA file name in-
cludes any 2-byte character, the RDV-1040
cannot show the file name correctly.
Only MP3/WMA files are shown on the
MP3/WMA CONTROL display.
The order of groups/tracks shown in the
MP3/WMA CONTROL display may differ
from the order shown on your personal
computer when you access the disc on your
computer.
Direct Selection
You can select a desired group directly by speci-
fying the group number.
1 During playback or while stopped, press
TITLE/GROUP
7
. [—] is shown in the
group display area of the display window.
2 Press the numeric buttons to specify a de-
sired group number.
Examples:
To select 5: press 5.
To select 23: press +10, +10, then 3.
To select 40: press +10, +10, +10, then 10.
Specify the group number within several sec-
onds after pressing TITLE/GROUP (i.e. while
the display window shows [—]). The RDV-1040
starts playback from track 1 of the selected
group.
3 Press the numeric buttons to specify a track
number. The RDV-1040 starts playback from
the specified track. You can also use
/ or / to specify a track, instead
of the numeric buttons.
Repeat Playback
During playback or while stopped, press RE-
PEAT
3
. Each time you press REPEAT, the
repeat mode changes as follows.
On Screen Display
If you press REPEAT while stopped, you need
to press ENTER
34
or (PLAY)
28
to start
repeat play.
To stop repeat playback press ■ (STOP)
9
.
Note that the repeat mode remains active.
To quit repeat playback –
During playback, press REPEAT
3
until no
repeat icon is shown on the display window.
While stopped, press REPEAT until repeat mode
indication on the MP3/WMA CONTROL dis-
play goes off.
NOTE
About JPEG Discs
The RDV-1040 can play back JPEG files on a
home recorded CD-R/RW disc. We refer to a
disc that contains JPEG files as a “JPEG disc”
in this manual.
Note that if a disc contains both of MP3/WMA
files and JPEG files, you can only play back
files of the type selected by the MP3&WMA/
JPEG setting in the PICTURE preference display
On a JPEG disc, each picture is recorded as
a file. Files are sometimes grouped into fold-
ers by category, etc.
•A folder which has one or more files is re-
garded as a group.
•A folder which does not directly contain any
files is ignored.
To Resume Playback
When the resume mode is ON
While the disc that you interrupted playback
of is still on the disc tray, press
(PLAY)
28
. The RDV-1040 resumes playback from
the position where playback was interrupted.
The TV screen shows RESUME PLAY.
To play back from the beginning of the disc ■
(STOP)
9
before pressing  (PLAY)
28
.
When the resume mode is DISC
RESUME
Press the OPN/CLS button
on the front
panel or the OPEN/CLOSE button
2
on the
remote control to open the disc tray and in-
sert a disc for which the RDV-1040 has stored
an interrupted position. The TV screen shows
RESUME STOP.
Press
(PLAY)
28
. The TV screen shows
RESUME PLAY and the RDV-1040 resumes
playback from the position where playback was
interrupted.
To play back from the beginning, after insert-
ing the disc, press ■ (STOP)
9
before
pressing
(PLAY)
28
to start playback.
NOTES:
If you change the RESUME setting from
DISC RESUME to OFF or ON, you cannot
resume playback of a disc whose “resum-
ing” position is stored. However, when you
reset RESUME to DISC RESUME, you will
then be able to resume playback of the disc.
If you interrupt the playback of a disc for
which an interrupted position has already
been stored, the memory will be updated
with the new interrupted position.
For a double-sided DVD VIDEO disc, the
RDV-1040 regards each side as a different
disc. Therefore, to resume playback of such
a disc, the disc must be inserted with the
same side down.
When the RDV-1040 memorizes an inter-
rupted point for a disc, it also memorizes
Audio, Subtitle and Angle settings.
The RDV-1040 may not resume playback
exactly from the interrupted point. In the
case of an SVCD/Video CD disc with PBC
function, the RDV-1040 may resume play-
back from a point slightly earlier or later
than the point where playback was inter-
rupted.
Various Speed Playback
To Rapidly Advance or
Reverse Playback
During playback, press
29
or
10
on the remote control unit. You can select from
1.5 times, 5 times, 20 times and 60 times nor-
mal speed. Pressing
(PLAY)
28
returns
the RDV-1040 to normal playback.
During playback, hold down
8
or
26
. Playback is advanced or reversed at 5
times normal speed.
During rapid playback, the sound is muted ex-
cept when playing an Audio CD, and when
playing a DVD VIDEO or Video CD at 1.5 times
normal speed. For Audio CD discs, the sound
is heard intermittently.
1.5x Quick Playback With
Sound
When you select 1.5 times normal speed play-
back, the disc is played back with sound.
• For DVD VIDEO discs, the subtitles remain
on.
• If the sound of a DVD VIDEO disc is recorded
in Dolby Digital or DTS format, stereo lin-
ear PCM signals are output. With some DVD
VIDEO discs, the sound quality and volume
may be altered, or the sound may be out
of tune.
• To switch from rapid reverse playback to x1.5
Quick Playback, first press
(PLAY)
28
, then press
29
once.
To Advance a Still Picture
Frame by Frame
With disc play paused, press
II
(PAUSE)
27
. Each time you press
II
(PAUSE), the
still picture advances to the next frame. Press
(PLAY)
28
to return to normal play-
back.
To Play Disc in Slow Motion
You can select from 1/32 times, 1/16 times,
1/4 times and 1/2 times normal speed.
During playback, press
II
(PAUSE)
27
, then
press
29
(to play forward slow motion),
or
10
(to play reverse slow motion, for
DVD VIDEO disc only). Pressing
(PLAY)
28
returns to normal playback.
• During slow motion playback, the sound will
be muted.
• Reverse slow motion playback is not pos-
sible for an SVCD and Video CD.
Locating the Beginning of a
Scene or Song
For DVD VIDEO: During playback, you can
skip a chapter or title, depending on the disc
configuration.
For SVCD/Video CD: During playback with-
out PBC function, you can skip a track –
For Audio CD: During playback or while in
stop mode, you can skip a track –
To skip forward, press
26
.
To skip backward, press
8
.
English