Info Sheet

Rotel’s new custom power ampliers address all of the
demands of the professional custom installer: easy rack-mount
installation, failsafe design, and set it and forget it operation.
They also come with the most important features that all music
lovers want: great sound and an affordable price.
This is all possible due to Rotel’s Balanced Design Concept, a
design philosophy that emphasizes an exhaustive analysis of
every part that goes into our circuits to determine not which one
will do, but which one will sound best.
There are three models to cover almost every custom
Continuous Power Output into 8 ohms
(20-20k Hz, < 0.03% THD)
6x50 watts/ch into 8 ohms,
all channels driven
Continuous Power Output into 4 ohms
(DIN 1 kHz,1.0% THD)
6 x 80 watts/ch into 4 ohms,
all channels driven
Total Harmonic Distortion
(20Hz-20kHz, 8 ohms)
Cont. rated power: < 0.03%
One-half rated power: < 0.03%
1 watt power: < 0.03%
Intermodulation Distortion
(60 Hz : 7 kHz, 4:1)
< 0.03%
Damping Factor
(20-20,000 Hz, 8 ohms)
>200
Input Impedance 20 k Ohms
Input Sensitivity 1.0 volt
Amplier Gain: 26 dB
Input Overload Level 5.0 volt
Peak Current > 25 A
Frequency Response (±1 dB) 10Hz-100kHz
S/N Ratio (IHF A) 115 dB
Crosstalk/Separation > 70 dB
Speaker Impedance 4 ohms minimum
Auto Turn On Level (with all
inputs)
3 mV input signal
Power Requirements USA: 120 Volts, 60 Hz
Europe: 230 Volts, 50 Hz
Power Consumption 450 Watts
Idle: 42 Watts
Standby: 2.6 Watts
Dimensions (W x H x D)
(not including rack adaptors)
430 x 144 x 429 mm
16
7
/
8
x 5
11
/
16
x 16
7
/
8
in
Weight (net) 15.5 kg, 34.1 lb.
Panel Height 3U, 132.6 mm/5
3
/
16
in
RKBF-1
Optional cooling fan for rack mount ampliers
application. The RKB-650 is rated 6 x 50 watts RMS @ 8 ohms.
These power ampliers are extremely robust and are able to
increase their output power into 4 ohms (20 Hz-20 kHz, 0.05%
THD).
Each RKB power amplier includes front access gain controls
for easy settings, a security cover for tamper-proof installations,
an IEC detachable power cord, a 12-volt trigger input for remote
system operation, and rack mount capability. With high output
power, high thermal stability and short-circuit protection, the
RKB Series is the ideal solution to any permanently installed
sound system.
RKB 650
Rack Mount Six Channel Amplier
Description
Specications
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T +1 978 664 3820
F +1 978 664 4109
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T +44 (0) 1903 221 763
F +44 (0) 1903 221 525
www.rotel.com

Summary of content (1 pages)