Info Sheet

Rotel of America
54 Concord St.
N. Reading, MA 01864
USA
T [phone]
F [phone]
www.rotel.com
Rotel Europe
Dale Road
Worthing
West Sussex BN11 2BH, UK
T [phone]
F [phone]
The Rotel Co. Ltd.
10-10 Shinsen-Cho
Shibuya-Ku,
Tokyo 150, Japan
This multi-channel power amplier delivers 120 watts (all channels driven), thanks to a power supply composed of a gener-
ous 1,500 VA toroidal transformer and eight 10,000 μf British-made Slit Foil capacitors. 20 output devices, each of which is
rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous
headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as
the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited
for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input
and output jacks make this amplier well suited for fully integrated systems with total remote control capability.
Power Congurations: 5 x 120 watts
Watts/Channel
all channels driven, unbridged,
8 ohm load, 20 to 20k Hz,
0.06% THD
120 watts
THD (20-20,000Hz)
cont. rated power
one-half rated power
one watt per channel
0.03%, maximum
0.03%, maximum
0.05%, maximum
IM Distortion (at rated ower, 60Hz:7kHz = 4:1) 0.03%, maximum
Damping Factor (8 ohms) 180
Input Sens. / Impedance 1.0V / 27 kohms
Frequency Response 15-100kHz (=0.5, -3dB)
S/N Ratio (IHF A) 115dB
Power Consumption 800 watts
Dimensions (W x H x D) 433 x 189 x 380 mm
17
1
/
8
x 7
1
/
2
x 15"
Front Panel Height
176 mm, 6.9"
Weight (net) 17 kg / 37.4 lbs
RMB 1075
High Current Five Channel Amplier
Description
Specications