Owner's Manual
Table Of Contents
- Owner’s Manual
- Contents
- Important Safety Instructions
- About Rotel
- A Word About Watts
- Getting Started
- The RR-AX150 Remote Control
- AC Power and Control
- Input Signal Connections
- Output Connections
- Speaker Outputs
- Headphone Output
- Remote Sensor
- Display
- Front USB Input
- APTX Bluetooth Connection
- Audio Controls
- Dimmer Control
- PC-USB Input
- RS232
- Rotel Link
- EXT REM IN Jack
- Network Connection
- Protection Circuit
- Settings Menu
- Troubleshooting
- Specifications
- Product Info
INTEGRATED AMPLIFIER
RA-1592
www.rotel.com
Continuous Power Output
(20 - 20kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion
(20 Hz - 20kHz, 8 ohms)
Intermodulation Distortion
(60 Hz : 7kHz, 4:1)
Frequency Response
Phono Input
Line Level Inputs
Damping Factor
(20 Hz - 20 kHz, 8 ohms)
Input Sensitivity / Impedance
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Input Overload
Phono Input (MM)
Line Level Inputs (RCA)
Line Level Inputs (XLR)
Preamplifier Output /
Impedance
Signal to Noise Ratio
(IHF A-weighted)
Phono Input (MM)
Line Level Inputs
Digital Section
Frequency Response
Signal to Noise Ratio
(IHF A-weighted)
Input Sensitivity / Impedance
Preamplifier Output Level
Coaxial / Optical Digital Signals
PC-USB
Power Requirements:
USA:
EC:
Power Consumption
Standby Power Consumption
BTU (4 ohms, 1/8th power)
Dimensions (W x H x D)
Front Panel Height
Weight (net)
SPECIFICATIONS
200 watts/channel
< 0.03%
< 0.03%
20 Hz - 20 kHz, 0 ± 0.5 dB
10 Hz - 100 kHz, 0 ± 0.5 dB
600
5.2 mV / 47k ohms
340 mV / 100k ohms
540 mV / 100k ohms
52 mV
3.5 V
5.5 V
1.9 V / 100 ohms
80 dB
103 dB
10 Hz - 90 kHz (0 ± 2 dB, Max)
102 dB
0 dBfs / 75 ohms
1.4 V (at -20 dB)
SPDIF LPCM (up to 192kHz 24 bit)
USB Audio Class 1.0 (up to 96kHz 24bit)
USB Audio Class 2.0 (up to 384kHz 32bit)*
*Driver installation required
DSD and DoP support
120 volts, 60 Hz
230 volts, 50 Hz
500 watts
< 0.5 watts
1239 BTU/h
431 x 144 x 425mm
17 x 5 7/8 x 16 in
3U (132.6mm, 5 1/4 in)
16.8kg, 37.04 lbs.