RC‑1572 Stereo Control Amplifier Amplificateur de Contrôle Stéréo Stereo-Vorverstärker Preamplificador Estereofónico Stereo-regelversterker Preamplificatore Stereo Stereokontrollförstärkare Предварительный стерео усилитель Owner’s Manual Manuel de l’utilisateur Bedienungsanleitung Manual de Instrucciones Gebruikershandleiding Manuale di istruzioni Instruktionsbok Инструкция пользователя
RC‑1572 Stereo Control Amplifier 2 Important Safety Instructions Notice The RS232 connection should be handled by authorized persons only. You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing.
Figure 1: Controls and Connections Commandes et Branchements Bedienelemente und Anschlüsse Controles y Conexiones 1 2 5 Bedieningselementen en aansluitingen Controlli e connessioni Kontroller och anslutningar Органы управления и разъемы 4 3 6 8 7 0 - = q 9 w GND e r t y u i o p [ ]
RC‑1572 Stereo Control Amplifier 4 Figure 2 : RR‑AX93 Remote Control Télécommande infrarouge RR-AX93 Fernbedienung RR‑AX93 Mando a Distancia RR-AX93 L M Afstandsbediening RR-AX93 Telecomando RR-AX93 RR-AX93 fjärrkontroll Пульт ДУ RR-AX93 A B C D E N O F G P H Q I J K
English 5 Figure 3 : Analog Input and Output Connections Branchements des entrées et sorties analogiques Analoge Ein- und Ausgangsanschlüsse Entradas y Salidas Analógicas Analoge ingangen en uitgangen Collegamenti ingressi ed uscite analogici Anslutningar för analoga in- och utgångar Аналоговые входные и выходные разъемы PH0NO R L GND ROTEL RC-1572 GND ROTEL RCD-1572 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 RP-565E ROTEL RB-1582MKII
RC‑1572 Stereo Control Amplifier 6 Figure 4 : Balanced (XLR) Input and Output Connections Branchements des entrées et sorties symétriques (XLR) Symmetrische (XLR-)Ein- und Ausgangsanschlüsse Entradas y Salidas Balanceadas (XLR) Gebalanceerde ingangen (XLR) en uitgangen Ingressi ed uscite analogici bilanciati (XLR) Balanserade in- och utgångar (XLR) Балансные (XLR) входные и выходные разъемы ROTEL RC-1572 GND ROTEL RCD-1572 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 RP-565E ROTEL RB-1582MKII
English 7 Figure 5 : Digital Inputs Connections Branchements des entrées numériques Digitale Eingänge Anschluss Conexiones de Entradas Digitales Digitale ingangen Collegamenti ingressi digitali Anslutningar för digitala ingångar Соединения Цифровой вход Computer (Supplied) ROTEL RC-1572 GND ROTEL RCD-1572 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 RP-565E
RC‑1572 Stereo Control Amplifier 8 Figure 6 : Rotel Link and 12V Trigger Connections Branchements Rotel Link et trigger 12 V Rotel Link- und 12V-Trigger-Anschlüsse Conexiones Rotel Link y para Señal de Disparo de 12V De Rotel Link en 12V trigger aansluitingen Collegamenti Rotel Link e segnali Trigger 12 V Rotel Link-anslutning och 12 V-anslutning för styrsignal Подсоединение Rotel Link и 12-В триггерного сигнала Important! : The 12V trigger cables will override the Rotel Link commands.
Figure 7: Front USB Input Connection Entrée USB en face avant Frontseitiger USB-Eingang Conexión de Entrada USB Frontal iPhone USB-ingang op het voorpaneel Ingresso USB frontale USB-port på fronten Порт USB на передней панели
RC‑1572 Stereo Control Amplifier Important Notes When making connections be sure to: 4 Turn off all the components in the system before hooking up any components, including loudspeakers. 4 Turn off all components in the system before changing any of the connections to the system. It is also recommended that you: 4 Turn the volume control of the amplifier all the way down before the amplifier is turned on or off.
English 11 Contents About Rotel Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Figure 1: Controls and Connections 3 Figure 2: RR‑AX93 Remote Control 4 Figure 3: Analog Inputs and Output Connections 5 Figure 4: Balanced (XLR) Input and Output Connections 6 Figure 5: Digital Inputs Connection 7 Figure 6: Rotel Link and 12V Trigger Connections 8 Figure 7: Front USB Input 9 Important notes 10 About Rotel. . . . . . . . . . . . . . . . . .
RC‑1572 Stereo Control Amplifier 12 A Few Precautions WARNING: To avoid potential damage to your system, turn off ALL the components in the system when connecting or disconnecting the loudspeakers or any associated components. Do not turn the system components back on until you are sure all the connections are correct and secure. Please read this manual carefully.
English 13 When the power switch is in the ON position, the remote control ON and OFF buttons A may be used to activate the RC-1572. In Standby mode the power LED remains illuminated, but the display is turned OFF. Digital Inputs i 12V TRIGGER Connection = There are two sets of digital inputs labeled COAXIAL 1 and 2, OPTICAL 1 and 2. Connect the COAXIAL or OPTICAL PCM outputs of your source component into these sockets. The digital signals will be decoded and played by the RC-1572.
RC‑1572 Stereo Control Amplifier 14 Front USB Input 5 See Figure 7 The front USB input can be connected to an iPhone, iPad or iPod device providing music playback. Simply plug the device into the front USB and select USB function from the source selector. The iPod and iPhone remain active allowing search and play functions. APTX Bluetooth Connection [ The Bluetooth Antenna [ on the RC-1572’s back panel is for wireless streaming via Bluetooth from your device (i.e. mobile phones, tablets or computers).
English POWER LED Dimmer 8 To change the brightness of the Power LED on the front panel, press the MENU 8 button to toggle to the POWER LED Settings. Then press the - or + buttons on the front panel to change the LED brightness. 15 supplied on CD included with the RC-1572. You will also need to switch the RC-1572 to USB Audio Class 2.0 playback mode with the following: •P ress MENU on the front panel until “PC-USB AUDIO CLASS” appears on the display. Valid settings include: BRIGHT, MID, DIM.
NOTE: These settings are stored permanently even after the RC-1572 is powered off. • BALANCE: Changes left/right balance (For more information on Balance sections). NOTE: This setting is stored permanently even after the RC-1572 is powered off. • DIMMER: Dims the display. NOTE: This setting is stored permanently even after the RC-1572 is powered off.
English entering the STATIC IP address information the network will be tested and connection status reported. NOTE: For more information regarding network connection please contact your authorized Rotel dealer. NOTE: A network connection is not required for the RC-1572 to operate. • MAIN: This shows the current software version loaded into the RC-1572. The software can be updated if the RC-1572 is properly connected to the Internet. • Press ENTER to check if a new software version is available.
RC‑1572 Stereo Control Amplifier 18 “Made for iPod,” and “Made for iPhone,” means that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, or iPhone may affect wireless performance.
The Rotel Co. Ltd. Tachikawa Bldg. 1F., 2-11-4, Nakane, Meguro-ku, Tokyo, 152-0031 Japan Rotel of America Sumiko 6655 Wedgwood RD N, Suite 115 Maple Grove, MN 55311 USA Phone: (510) 843-4500 (option 2) E-mail: service@sumikoaudio.net Rotel Canada Kevro International 902 McKay Rd.
STEREO PREAMPLIFIER RC-1572 AKM premium 32-bit/ 768kHz Digital to Analog Converter iOS control App Moving magnet phono input for turntable connection The heart of an uncompromising audiophile stereo “separates” system is the preamplifier. Separate components hold the promise of the best possible fidelity, since each device is optimized for its role in the sound reproduction chain.
STEREO PREAMPLIFIER RC-1572 SPECIFICATIONS Total Harmonic Distortion (20Hz-20kHz) < 0.004% Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.004% Input Sensitivity / Impedance Phono Input (MM) Line Level Inputs (RCA) Line Level Inputs (XLR) 3 mV / 47k ohms 200 mV / 100k ohms 300 mV / 100k ohms Input Overload Phono Input Line Level Inputs 62 mV 4V Output Level Line Level (RCA) Balance (XLR) 1V 2V Frequency Response Phono Input Line Level Inputs 20 Hz-20kHz, (0 ±0.3 dB) 10 Hz-100kHz, (0 ±0.
