RC‑1572MKII Stereo Control Amplifier Amplificateur de Contrôle Stéréo Stereo-Vorverstärker Preamplificador Estereofónico Stereo-regelversterker Preamplificatore Stereo Stereokontrollförstärkare Предварительный стерео усилитель Owner’s Manual Manuel de l’utilisateur Bedienungsanleitung Manual de Instrucciones Gebruikershandleiding Manuale di istruzioni Instruktionsbok Инструкция пользователя
RC‑1572MKII Stereo Control Amplifier 2 Important Safety Instructions Notice The RS232 connection should be handled by authorized persons only. You must allow a minimum 10 cm or 4 inches of unobstructed clearance around the unit. WARNING: There are no user serviceable parts inside. Refer all servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing.
Figure 1: Controls and Connections Bedieningselementen en aansluitingen Commandes et Branchements Controlli e connessioni Bedienelemente und Anschlüsse Kontroller och anslutningar Controles y Conexiones Органы управления и разъемы 1 2 5 4 3 6 7 0 - = q 9 8 w GND e r t y u i o p [ ]
RC‑1572MKII Stereo Control Amplifier 4 Figure 2 : RR‑AX93 Remote Control Télécommande infrarouge RR-AX93 Fernbedienung RR‑AX93 Mando a Distancia RR-AX93 L M Afstandsbediening RR-AX93 Telecomando RR-AX93 RR-AX93 fjärrkontroll Пульт ДУ RR-AX93 A B C D E N O F G P H Q I J K
English 5 Figure 3 : Analog Input and Output Connections Branchements des entrées et sorties analogiques Analoge Ein- und Ausgangsanschlüsse Entradas y Salidas Analógicas Analoge ingangen en uitgangen Collegamenti ingressi ed uscite analogici Anslutningar för analoga in- och utgångar Аналоговые входные и выходные разъемы PHONO R L GND Rotel RC-1572MKII GND Rotel RCD-1572 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 RP-565E Rotel RB-1582MKII
RC‑1572MKII Stereo Control Amplifier 6 Figure 4 : Balanced (XLR) Input and Output Connections Branchements des entrées et sorties symétriques (XLR) Symmetrische (XLR-)Ein- und Ausgangsanschlüsse Entradas y Salidas Balanceadas (XLR) Gebalanceerde ingangen (XLR) en uitgangen Ingressi ed uscite analogici bilanciati (XLR) Balanserade in- och utgångar (XLR) Балансные (XLR) входные и выходные разъемы Rotel RC-1572MKII GND Rotel RCD-1572 CLASS 1 LASER PRODUCT APPAREIL LASER DE CLASSE 1 RP-565E Rotel RB-1
English 7 Figure 5 : Digital Input and 12 Volt Trigger Out Connections Entrées numériques et Branchements des sorties trigger 12 V Anschlussdiagramm (Digitaleingänge, 12V-Trigger-Ausgänge) Entrada Digital y Conexiones de Salida para Señal de Disparo de 12 Voltios Digitale ingangen en 12V-triggeruitgangen Collegamenti ingressi digitali e segnali Trigger 12 V Anslutningar för digitala ingångar och 12-volts styrsignaler Цифровой вход и выход 12-В триггерного сигнала Computer (Supplied) Rotel RC-1572MKII G
RC‑1572MKII Stereo Control Amplifier Important Notes When making connections be sure to: 4 Turn off all the components in the system before hooking up any components, including loudspeakers. 4 Turn off all components in the system before changing any of the connections to the system. It is also recommended that you: 4 Turn the volume control of the amplifier all the way down before the amplifier is turned on or off.
English 9 Contents About Rotel Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Figure 1: Controls and Connections 3 Figure 2: RR‑AX93 Remote Control 4 Figure 3: Analog Inputs and Output Connections 5 Figure 4: Balanced (XLR) Input and Output Connections 6 Figure 5: Digital Inputs Connection and 12 Volt Trigger Out Connection 7 Important notes 8 About Rotel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RC‑1572MKII Stereo Control Amplifier 10 The main functions of the RC‑1572MKII are easy to install and use. If you have experience with other stereo systems, you shouldn’t find anything perplexing. Simply plug in the associated components and enjoy. A Few Precautions WARNING: To avoid potential damage to your system, turn off ALL the components in the system when connecting or disconnecting the loudspeakers or any associated components.
English Input Signal Connections NOTE: To prevent loud noises that neither you nor your speakers will appreciate, make sure the system is turned off when you make any signal connections. Phono Input e and Ground Connection (GND) 9 See Figure 3 Plug the cable from the turntable into the appropriate left and right phono inputs. If the turntable has a “ground” wire, connect it to the screw terminal to the left of the Phono inputs. This will help prevent hum and noise.
RC‑1572MKII Stereo Control Amplifier 12 This configuration option allows the attached streaming source to remain powered for use with the Signal Sense function for automatic power on/ off control of the amplifier. NOTE: When configured to provide continuous power to the rear panel USB port the RC-1572MKII will consume additional power even when in standby mode. Audio Controls Volume Control 4G Turn the controls clockwise to increase the volume, or counter clockwise to decrease the volume.
English 13 For additional information on the connections, software, and operating codes for RS232 control of the RC-1572MKII, contact your authorized Rotel dealer. NOTE: Support for MQA and MQA Studio requires USB Audio Class 2.0. Please select USB Audio 2.0 to support MQA. PC-USB Input o Network Connection p See Figure 5 The RC-1572MKII can be attached to a network using the rear panel NETWORK socket p. The NETWORK configurations allow both STATIC and DHCP IP addressing.
higher in Quick Power mode. If network control is not required select the Normal Power mode. “Normal” is the factory default. RC‑1572MKII Stereo Control Amplifier NOTE: The Volume knob on the front panel and Volume +/- buttons on the IR remote are disabled when the volume is Fixed. To disable this feature set the Fixed Volume level to “Variable”. Valid settings include: Normal, Quick. NOTE: When the POWER OPTION is configured to Quick, the RC- 1572MKII will consume additional power in standby mode.
English NOTE: It is recommended to Reset Factory Defaults after the software update is complete. • PC-USB: This shows current loaded software version for PC-USB processor. •S IGNAL SENSE: Check if an audio signal is present on the configured Signal Sense input. The RC-1572MKII monitors the data stream to determine if there is audio. If there is no audio detected for 10 minutes, the RC-1572MKII will enter Signal Sense Power Mode.
RC‑1572MKII Stereo Control Amplifier 16 Specifications Total Harmonic Distortion (20 Hz - 20 kHz) < 0.004% Intermodulation Distortion (60 Hz : 7 kHz, 4:1) < 0.
The Rotel Co. Ltd. Tachikawa Bldg. 1F., 2-11-4, Nakane, Meguro-ku, Tokyo, 152-0031 Japan Rotel USA Sumiko 6655 Wedgwood RD N, Suite 115 Maple Grove, MN 55311 USA Phone: (510) 843-4500 (option 2) E-mail: service@sumikoaudio.net Rotel Canada Kevro International 902 McKay Rd. Suite 4 Pickering, ON L1W 3X8 Canada Tel: +1 905-428-2800 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: + 44 (0)1903 221 710 Fax: +44 (0)1903 221 525 www.rotel.
