POWER 1 2 3 4 5 6 7 8 9 +10 0 MEM FRQ DIRECT TUNE PRESET FM MONO BAND X ON OFF CH VOL SMART SMT MUTE GUIDE MENU C M CTR OSD ENT AUD CD SEARCH- SEARCH+ S R SUB SUR TUN TAPE EXT DEVICE / INPUT V1 V2 V3 V4 V5 RR-1060 RR-1060 Universal Learning Remote Control Télécommande universelle à apprentissage de commandes Spanish Telecomando universale programmabile Lernfähige Universalfernbedienung Nederlands Programmerbar fjärrkontroll Controlo remoto universal de apre
Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.
RR-1060 Layout • Disposition des commandes Spanish • Disposizione dei tasti Aufbau • Dutch • Layout Apresentação Расположение органов управления � � POWER � 1 2 3 4 5 6 7 8 9 +10 0 MEM FRQ DIRECT TUNE PRESET FM MONO BAND X ON OFF CH VOL SMART SMT GUIDE MUTE MENU C M CTR OSD ENT SEARCH- SEARCH+ S R SUB SUR � AUD � CD TUN TAPE EXT DEVICE / INPUT V1 V2 V3 RR-1060 V4 V5
POWER 1 2 3 4 5 6 7 8 9 +10 0 MEM � FRQ DIRECT TUNE PRESET X ON OFF CH VOL � SMART SMT MUTE GUIDE MENU C M CTR BAND �� OSD �� ENT FM MONO � SEARCH- SEARCH+ S R SUB SUR CD DISC1 DISC2 DISC3 DISC4 EQ DYN REC ZONE SUR+ DISC- DISC+ PROG RANDOM REPEAT 2CH PL C PL M 5CH 7CH DIGEST TITLE P-SCAN OPEN DISPLAY AUDIO ANGLE SBTITLE ZOOM DISP TAPE2 PHONO TONE D-SLT A-B GOTO SLOW P-TUN TP TA DVD � DISC5 RESUME REPEAT SCAN PTY INPUT 1
RR-1060 Flip Down Cover • Volet rabattable Spanish • Sportellino apribile Aufklappbare Abdeckung • Dutch Uppfällbart lock • Tampa articulada Откидывающаяся вниз крышка LIGHT LIGHT
Character Map • Jeu des caractères affichés • Spanish • Lista dei caratteri Zeichenübersicht • Dutch Teckenbeskrivning • Mapa de Caracteres • Таблица символов Learning Commands • Apprentissage de commandes • Spanish Apprendimento comandi Lernen von Befehlen • Dutch Inlärning av kommandon Aprendizagem de Comandos Таблица символов POWER 1 2 3 4 5 6 7 8 +10 0 OFF CH VOL 9 MEM FRQ DIRECT ON X SMART SMT GUIDE TUNE PRESET MUTE MENU M C OSD CTR ENT FM MONO BAND AUD CD V1 V2 SE
RR-1060 Contents Layout Flip Down Cover Character Map Learning Commands 2 4 5 5 Introduction .............................................................. 8 Key Features 8 Sensible Precautions 8 Battery Installation 8 Overview ..................................................................
Learning Commands From Another Remote ............... 20 Learning Commands 20 Multi-Step Button Learning 21 Smart Macro Programming ...................................... 22 Smart Macro Programming 22 Clearing a Smart Macro 23 Changing a Smart Macro 23 Clearing learned commands ..................................... 24 Clearing a Single Learned Command 24 Clearing All Learned Commands for a DEVICE/INPUT Button Clearing All Learned Commands for ALL DEVICE/INPUT Buttons 24 25 Custom Labels ..............
RR-1060 Introduction The RR-1060 Universal Learning Remote Control can replace up to nine remote controls, operating A/V components from Rotel or other brands. Key Features • Programmed to operate Rotel surround sound processors, receivers, and DVD players. • Simple programming for hundreds of components using built-in codes. • Learning function to teach the RR-1060 commands from other remotes. Multi-step learning on five buttons for multiple command sequences from other remotes.
Overview The RR-1060 is a universal learning remote control that can operate all of the components in your audio/video system. Control codes for Rotel components are already programmed. You can easily customize the RR-1060 to operate other components by selecting command sets for hundreds of components from the RR-1060’s extensive database. See the Programming section of this manual for easy to follow instructions.
RR-1060 Folding Cover A folding cover conceals the buttons at the bottom of the RR-1060. These buttons provide extra command functions. Leave the folding cover in the closed position to simplify the RR-1060 for routine use. Open the cover to access the additional buttons. Device/Input Buttons Two rows of buttons on the folding cover (AUD, CD, TUN, TAPE, EXT and V1–V5) are used to select a component for control by the remote and, if desired, to activate the input for the component you are operating.
EXT Button The EXT button is a special input selection button for Rotel audio/video receivers or surround sound processors. It is used to select the multi-channel analog inputs when playing SACD or DVD-A discs. This bypasses the digital/analog processing in the receiver or surround sound processor. Press and hold the EXT button for more than one second to select the multi-channel analog input on a Rotel A/V receiver. The EXT button contains a duplicate of the remote commands programmed in the V1 device.
RR-1060 At the bottom right are nine buttons that duplicate the cursor functions for cable or satellite TV receiver or audio/video components plus four round buttons are for extra functions, such as Last Channel, Viewing Guide, etc. At the bottom left are five oval buttons that duplicate the basic transport control functions (Play, Fast Forward, Pause, etc.) of a CD player, DVD player or video tape recorder. NOTE: The numeric buttons, 0 – 9, are also available for sending Smart Macros.
Operating the RR-1060 This section of the manual explains the basic operation of the RR-1060 and most of its standard features. NOTE: The AUD DEVICE/INPUT button of the RR-1060 is pre-programmed with control codes for Rotel A/V receivers or surround sound processors. The V1 button is pre-programmed to operate Rotel DVD players. The CD button is pre-programmed to operate Rotel CD players.The other DEVICE/INPUT buttons (TUN, TAPE and V2 – V5) are unprogrammed.
RR-1060 When a button is pressed, a beep tone confirmation is heard. This feature can be disabled. See the Disabling the Beep Tone section of the manual. When an IR command is being sent, a triangular indicator appears in the upper right corner of the LCD display and the label for the command is shown in the display. These labels can be customized. See the Labelling Command Buttons section of this manual. If a button is pressed that has no command, the LCD shows NO DATA.
Programming The RR-1060 contains hundreds of command sets for components. Programming the remote involves selecting the command sets that correspond to the components in your system and assigning each of them to one of the nine DEVICE buttons by entering the 4-digit code for that component. This need only be done once during initial setup of the RR-1060. There are four ways of finding the correct 4-digit code. The easiest way to program Rotel components is to search by the model number.
RR-1060 1. Press the DEVICE/INPUT button where you wish to program this component’s code (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP MODEL appears in the display. Press the ENT button to confirm. 4. Press the UP/DOWN cursor buttons until the type of component you are searching for appears in the display (AUD, DVD, CD) Press the ENT button to confirm.
To program using the brand search: 1. Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP BRAND appears in the display. Press the ENT button to confirm. 4. Press the UP/DOWN cursor buttons until the type of component you are searching for appears in the display (TV, VCR, SAT, CTV, DVD, CD, etc.
RR-1060 Programming by 4-Digit Code Find your audio/video component in the 4-digit code list. Then proceed as follows: 1. Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP CODE appears in the display. Press the ENT button to confirm. 4. Input the 4-digit code using the 0–9 buttons.
Programming by Auto-Search To search for a code from the full list of available 4-digit codes for a type of component: 1. Press the DEVICE/INPUT button where you wish to program this component’s codes (AUD, CD, TUN, TAPE and V1–V5). 2. Press the SETUP button (the LCD displays SETUP). Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until SETUP A. SEARCH appears in the display. Press the ENT button to confirm. 4.
RR-1060 Learning Commands From Another Remote If you are unable to find a command set using the Programming steps, or if you need additional commands, you can teach the RR-1060 commands directly from your existing remotes. This procedure is called Learning. Learning Commands To teach the RR-1060 the commands from one of your other remotes, place the two remote controls end to end as shown in the illustration at the front of this manual.
NOTE : The RR-1060 has enough memory to learn 600 commands. If the memory capacity is reached, the LCD displays FULL when you attempt to learn a command. Multi-Step Button Learning The five buttons labeled SCAN, PTY, P-TUN, TP, TA provide a special option – the ability to learn up to three different commands on a single button.
RR-1060 Smart Macro Programming Twenty of the buttons on the RR-1060 (the 10 DEVICE/INPUT buttons plus the numeric buttons 0 – 9) can store multiple command macro sequences – for example, a sequence that turns on the TV set, selects channel 5, turns on the surround processor, and selects the TV input. Smart Macro Programming A macro sequence is sent by pressing the SMART button followed by the button where the macro is stored.
Clearing a Smart Macro To clear a previously saved Smart Macro: 1. Press the SETUP button and then press the UP/ DOWN cursor buttons until SMART appears in the display. Press ENT. 2. Press the UP/DOWN cursor buttons until SMART CLEAR appears in the display. Press the ENT button to confirm. CLEAR SMART? appears in the display. 3. Press the Smart Macro button to be cleared (for example, press 1 to clear a Smart Macro stored in the 1 button). 4. A confirmation appears in the LCD.
RR-1060 7. A confirmation appears in the LCD. Use the UP/DOWN buttons to select either YES (to change the command) or NO (to discard the changes). Press ENT to confirm. NOTE: If you attempt to change an unprogrammed Smart Macro button, the word EMPTY appears and the remote returns to normal mode.
3. Press the UP/DOWN cursor buttons until CLEAR ONE DEV appears in the display. 4. Press the ENT button to delete all learned commands for the DEVICE/INPUT button. Clearing All Learned Commands for ALL DEVICE/INPUT Buttons 1. Press the SETUP button (the LCD displays SETUP). Press the UP/DOWN cursor buttons until EDIT appears in the display. Press the ENT button to confirm. 2. Press the UP/DOWN cursor buttons until CLEAR ALL DEV appears in the display. 3.
RR-1060 Editing DEVICE/INPUT button labels To change the label for a button, make sure that you have selected the Page 2 set of labels (see above), then: 1. Press the SETUP button. 2. Press the UP/DOWN cursor buttons until EDIT appears in the display. Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until EDIT DEVICE appears in the display. Press the ENT button to confirm. 4. Press the DEVICE/INPUT button (AUD, CD, TUN, TAPE, EXT, V1–V5) that you wish to relabel.
5. Press the COMMAND button that you wish to relabel. The current label appears on the second line of the display. 6. Press the +/– buttons to select a character to change and the UP/DOWN cursor buttons to change the letter. The “Character Map” illustration shows the available characters. Labels can be a maximum of 8 characters. 7. When the new label is complete, press the SETUP button to save the new label. 8. A confirmation message appears in the LCD.
RR-1060 Additional Setup Options Volume/Mute Punch-Through In many systems, the volume is adjusted at the TV set or the A/V processor. For convenience, the RR-1060 has a Volume Punch-Through feature that copies the volume and mute commands from either the TV device or AUD to DEVICE/INPUT buttons for other components such as CD players, VCRs, SAT receivers, and DVD players.
Disabling the Beep Tone As shipped from the factory, the RR-1060 beeps as confirmation whenever a button is pressed. This feature can be disabled or enabled as follows: 1. Press the SETUP button (the LCD displays SETUP). 2. Press the UP/DOWN cursor buttons until BEEP SOUND appears in the display. Press the ENT button to confirm. 3. Press the UP/DOWN cursor buttons until BEEP ON or BEEP OFF appears in the display. Press the ENT button to select the desired option.
RR-1060 The data transfer begins. The sending remote displays SENDING DATA. The receiving remote displays RECEIVING DATA. At the completion of the data transfer (which may take 4 or 5 minutes), one of the following confirmation messages appears in the display of the receiving RR-1060: • If the data transfer is successful, the SEND OK prompt appears on the sending remote and RECEIVE OK appears on the receiving remote.
The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: +44 (0)1903 221600 Fax: +44 (0)1903 221525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.
Code List Le Codes Lista de Códigos Numéricos Elenco codici Liste der Codes Code Lijst Kodlista Таблица Кодов POWER 1 2 3 4 5 6 7 8 0 FRQ DIRECT OFF CH VOL 9 MEM +10 ON X SMART SMT GUIDE TUNE PRESET MUTE MENU M C CTR OSD ENT FM MONO BAND AUD CD V1 V2 SEARCH- SEARCH+ S R SUB SUR TUN TAPE EXT DEVICE / INPUT V3 V4 V5 RR-1060 RR-1060 Universal Learning Remote Control Télécommande Universelle Mando a Distancia Universal Telecomando Universale Programmabile Lernfähig
2 RR-1060 3 Contents TV VCR SAT CTV DVD CD AMP TV 3 17 21 25 27 30 31 ACCENT ACTION ADMIRAL ADVENTURA ADVENTURI ADYSON AGAZI AGB AIKO AKAI AKIBA AKURA ALARON ALBA ALBIRAL ALCYON ALFA ALLORGAN ALLSTAR AMBASSADOR America Action AMERICAN HIGH AMERICANA AMPLVISION AMSTRAD ANAM ANGA ANGLO ANITECH ANSONIC AOC AR SYSTEM ARC EN CIEL ARCAM ARCON ARISTONA ART TECH ARTHUR-MARTIN ASA ASBERG ASORA ASTRA ASUKA ASWO ATLANTIC ATLAS ATORI ATORO AUCHAN AUDIO TECHNICA AUDIOSONIC AUDIOTON AUDIOVOX AUSIND AUTOVOX AWA BANG
4 RR-1060 BANG & OLUFSEN BASIC LINE BASTIDE BAUER BAUR BAYSONIC BEC BECRESE BEKO BELCOR BELL & HOWELL BENCHMARK-BEAUMARK BEON BEST BESTAR BIGSTON BLACK PANTHER BLACK STAR BLACKSTRIPE BLAUPUNKT BLUE SKY BONDSTEC BOSCH BOSCH-BAUER BRADFORD BRANDT BRANDT ELECTRONIQUE BRAUN BRENDSTAR BRINKMANN BRIONVEGA BRIORRYEGA BROCKWOOD BROKSONIC BROTHER BRUNS BSR BTC BUSH CAMPLE CANDLE CAPEHART CAPSONIC CARNIVALE CARREFOUR CARVER CASIO CATHAY CCI CENTURION CENTURY CGE CGM CIE CIHAN 5 3991 1031 3861 2751 0031 1361 1981
6 RR-1060 ELECTRO TECH ELECTROBRAND ELECTROHOME ELECTRONIKA ELEKTA ELEKTRONIKA ELIN ELITE ELMAN ELTA EMERSON ENVISION EON EPC ERRES ETRON EURO-FEEL EUROMANN EUROPHON EXPERT EXPERT (F) EXPERT (I) FENNER FERGUSON FIDELIS FIDELITY FILSAI FINLANDIA FINLUX FIRST LINE FISCHER FISHER FLINT FORMENTI FORTRESS FRABA FRONTECH FUBA FUJITSU FUJITSU GENERAL FUNAI FUTURETECH GALAXIS GALAXY GALERIA GBC GE GEANT CASIONO GEBER GEC GELOSO GEMSOUND GENERAL GENERAL TECHNIC GENEXXA 7 1521 1661 0171 0951 0661 0951 0981 0011 21
8 RR-1060 IMPERIAL INDIANA INFINITY INGELEN INGERSOLL INNO HIT INNOHIT INTEQ INTERBUY INTERCORD INTERDISCOUNT INTERFUNK INTERVISION IRRADIO ISKRA IST ISUKAI ITC ITL ITS ITT JACSON JBL JCB JEC JETPOINT JINLIPU JOCEL JUMBOTRONIC JVC KAIDO KAISER KAISUI KAMBROOK KAMP KAPSCH KARCHER KEC KENDO KENNEDY KENWOOD KIOTA KLH KLOSS KNEISSEL KOBIC KOLSTER KONICHI KÖNIG KONKA KORPEL KORTING KÖRTING KTV KUASHO KUBA 9 1031 2681 1031 1031 0591 1521 1031 1031 4431 0651 2591 1031 0811 2001 2681 4321 0551 4221 1031 3221 10
10 RR-1060 MERCURY MERRIT METEOR METZ MGA MIDLAND MINERVA MINOKA MINUTZ MITSUBISHI MIVAR MONITOR MOTION MOTOROLA MTC MULTIMEDIA MULTISTANDARD MULTITECH MURPHY NAD NAMSUNC NAO NAONIS NAP NATIONAL NEC NECKERMANN NEI NESCO NEW WORLD NEWTECH NIKKAI NIKKO NISSAN NOBLEX NOBLIKO NOGAMATIC NOKIA NOKIA AKAI NONAME NORDMENDE NOVA NOVABEAM NOVATRONIC NTC NUCLEONIC O GENERAL OCEANIC OKANO OLYMPIC ONCEAS 11 1521 2091 3301 0691 2831 4261 4241 2551 1031 4451 0871 4101 2531 0771 2551 1031 0771 1561 3221 1031 3941 2001
12 RR-1060 PORTLAND PRANDONI PRINCE PRECISION PRIMA PRINCESS PRINZ PRISM PROELCO PROFEX PROFITRONIC PROLINE PROSCAN PROTEC PROTON PRO-VISION PULSAR PULSER PYE PYMI QTY1 QUASAR QUELLE QUESTA QUIERO R LINE RADIALVA RADIO SHACK RADIOLA RADIOMARELLI RADIONETTE RADIOTONE RADIX RANK RANK/BUSH/MURPHY RCA REALISTIC RECOR RECORD REDIFFUSION REGENTE REVOX REVOX/STUDER REX RFT RHAPSODY RICE CLUB RMB RM-U301 ROADSTAR ROSITA ROSNER ROTEL ROWA 13 0891 2051 3861 0011 1521 2591 4481 1031 1521 0981 3121 0771 0661 1521 0
14 RR-1060 SIESTA SIGMAX SIGNATURE SILMA SILVA SILVER SINGER SINODYNE SINOTEC SINUDYNE SKANTIC SMARAGD SNYDER SOGERA SOLAVOX SONITRON SONOKO SONOLOR SONTEC SONY SOUND & VISION SOUNDESIGN SOUNDMASTER SPECTRA SPECTRICIAN SR2000 SSS STANDARD STARLITE STARLUX STARTLITE STERN SUNKAI SUNRISE SUNSTAR SUNWOOD SUPERTEC SUPERTECH SUPRA SUPREMACY SUPREME SUTRON SYC LINE SYDNEY SYLVANIA SYMPHONIC TADISTAR TALENT TANDBERG TANDY TASHIKO TATUNG TEAK TEC TECHLINE TECHNEMA TECHNICS TECHNILAND TECHNISAT 15 2661 0771 0011
16 RR-1060 UHER ULTRA ULTRAFOX ULTRAVOX UMA UNIC RADIO UNIMOR UNITED UNIVERSUM UNIVOX URANYA VANGUARD VECO VECTOR RESEARCH VECTOR/VICTOR VESTEL VEXA VICTOR VIDEO SYSTEM VIDEOLOGIOUE VIDEOPLUS VIDEOSAT VIDEOTON VIDIKRON VIDION VIDTECH VISION VISON VORTEC VOXSON VTQ WALKIE WALTHAM WARDS WATSON WATT RADIO WEGA WEGAVOX WELTBLICK WHITE WESTINGHOUSE WINSTON WINTERNITZ WIZJA WORLD-TECH WORLDVIEW YAMAHA YOKO YORK YORX ZANUSSI ZENITH 17 0941 3161 3951 2031 1031 4311 1971 1031 0631 0661 2701 3581 2111 1521 1521 15
18 RR-1060 FIRST LINE FISHER FORMENTI-PHOENIX FRONTECH FUJI FUNAI GARRARD GBC GE GEC (UK) GELOSO GENERAL TECHNIC GO VIDEO GOLDSTAR GOODMANS GOODMANS (UK) GRADIENTE GRAETZ GRANADA GRANADA (UK) GRUNDIG 0002 0162 0012 0112 1322 0432 1312 0002 1322 0022 0002 1172 1512 0012 0002 0002 1312 0022 0052 0052 0052 1252 HANSEATIC 0052 HARLEY DAVIDSON 1312 HARMAN/KARDON 0122 HCM 0002 HINARI 0002 HI-Q 1392 HITACHI 0042 1352 HUGHES NETWORK SYSTEM 1362 IMPERIAL 0072 INGERSOL 0442 INNO HIT 0002 INNOVATION 1142 INTERFUNK
20 RR-1060 QUASAR QUELLE RADIO SHACK RADIONETTE RADIX RANDEX RCA REALISTIC REPLAY TV RET REX RICOH RUNCO SABA SAISHO SALORA SAMSUNG SAMTRON SANKY SANSUI SANYO SBR SCHAUB LORENZ SCHNEIDER SCOTT SEARS SEG SEI-SINUDYNE SELECO SEMP SENTRA SHARP SHINTOM SHOGUN SIEMENS SINUDYNE SONITRON SONOKO SONY STS SUNKAI SUNSTAR SYLVANIA SYMPHONIC TANDBERG TASHIKO TATUNG TCM TEAC TECHNICS TEKNIKA TELEFUNKEN TEMPEST TENOSAL THOMAS THOMSON THORN 21 1322 0012 0522 1312 0022 1332 1332 1322 0012 1322 1532 1072 0042 0952 1342 0
22 RR-1060 ELTA SAT EURODEC EUROSTAR EXPRESSVU FERGUSON FINLUX FORCE FOXTEL FRACARRO FUBA FUJITSU GE GEMINI GENERAL INSTRUMENT GENERAL INSTRUMENTS GIUCAR RECORD GRUNDIG HIGH PERFORMANCE HIRSCHMANN HITACHI HITACHI DSS HTS HUGHES NETWORKS SYSTEM HUGHES SATELLITE DSS HUMAX ICX INTERNATIONAL JEEMON JERROLD JOHANSSON JVC KATHREIN KENWOOD KOSMOS KYOSTAR LENG LIFESAT LUXOR MACAB MACOM STATE MAGNAVOX MAGNAVOX DSS MASPRO MEDION MEMOREX METRONIC METZ MICROMAXX MITSUBISHI MORGANS MULTICHOICE MURATTO NEC NEXT LEVEL N
24 RR-1060 TANDY TANTEC TATUNG TECHNISAT TELE+ TELECOM TELEMAX TELEVES THOMSON THORN-FERGUSON TOSHIBA TOSHIBA DSS TPS TRIAD UNIDEN UNIDEN DSS US ELECTRONICS VIDEO CIPHER II VORTEC VTECH WINERSAT WISI WOLSEY WORLDSAT XSAT ZEHNDER ZENDER ZENITH ZINWEL 25 0913 0613 0513 0083 1843 0303 0583 0173 1653 2493 2153 0073 0943 2723 1373 0403 0033 3123 0883 2913 0753 0433 0243 0053 0913 1603 1383 0263 0403 2683 3363 2093 CTV 0543 0093 0523 0553 1053 0293 1663 2483 3153 0183 2413 2743 2443 2153 0213 0443 0473 1313
26 RR-1060 NSC OAK OPTUSVISION PACE PANASONIC PARAGON PHILIPS PHILIPS/MAGNAVOX PIONEER POPULAR MECHANICS PULSAR QUASAR RADIO SHACK RCA REALISTIC RECOTON REGAL REGENCY REMBRANDT RUNCO SAMSUNG SCIENTIFIC ATLANTA SIGNAL SIGNATURE SKYMASTER SL MARX SPRUCER STANDARD COMPONENTS STAR SIGHT STAR SIGHT CABLE SERVICE STAR TRAK STARCOM STARGATE STARQUEST STS TANDY TELE TELE+1 TELECOM ITALIA TELESERVICE TELEVIEW TEXSCAN TOCOM TOSHIBA TUDI TUSA TV86 UNIKA UNITED ARTISTS UNITED CABLE UNIVERSAL VIDEO TECH VIDEOWAY VIEWM
28 RR-1060 JAMO JMB JOCEL JVC KARCHER KENDO KENWOOD KISS LASONIC LAWSON LECSON LENCO LENOXX LEXIA LG LIFETEC LIMIT LINN LOEWE LOGIC LAB LOGIX LUMATRON LUXMAN MAGNAVOX MANHATTAN MARANTZ MATSUI MBO MEDION METZ MICROMEDIA MICROMEGA MICROSOFT MICROSTAR MINAX MITSUBISHI MONYKA MUSTEK Mx ONDA NAD NAIKO NEUFUNK NORDMENDE ONKYO OPTIMUS ORION ORITRON PACIFIC PALLADIUM PALSONIC PANASONIC PHILIPS PHONOTREND PIONEER PROLINE PROSCAN PROSONIC PROVISION RADIONETTE RAITE RCA REC RED STAR 29 0595 0455 0615 0705 0395 0525
30 RR-1060 31 CD ADC ADCOM AIWA AKAI ARCAM AUDIO-TECHNICA BSR BURMESTER BUSH CALIFORNIA AUDIO LABS CAMBRIDGE AUDIO CARRERA CARVER DENON DKK DUAL EMERSON FISHER GARRARD GENEXXA GOLDSTAR GOODMANS GRUNDIG HARMAN/KARDON HITACHI INNOVATION JVC KENWOOD KRELL LIFETEC LIGHT CONTROL LINN LKI LUXMAN MAGNAVOX MAGNUM MARANTZ MATSUI MATSUSHITA MCS MEDION MEMOREX MERIDIAN MGA MICROMAXX MICROMEGA MISSION MITSUBISHI MTC NAD NAIM NAKAMICHI NEC NIKKO NONAME NSM ONKYO OPTIMUS 0346 0286 0586 0226 1066 0316 0356 1316 1126 0
The Rotel Co. Ltd. 10-10 Shinsen-Cho Shibuya-Ku Tokyo 150-0045 Japan Phone: +81 3-5458-5325 Fax: +81 3-5458-5310 Rotel of America 54 Concord Street North Reading, MA 01864-2699 USA Phone: +1 978-664-3820 Fax: +1 978-664-4109 Rotel Europe Dale Road Worthing, West Sussex BN11 2BH England Phone: + 44 (0)1903 221 761 Fax: +44 (0)1903 221525 Rotel Deutschland Kleine Heide 12 D-33790 Halle/Westf. Germany Phone: +49 05201-87170 Fax: +49 05201-73370 www.rotel.
