Owners Manual
Table Of Contents
- Introduction
- Key Features
- Battery Installation
- Overview
- IR Emitter/Sensor 
- LCD Display 
- Light Button 
- Folding Cover 
- Device/Input Buttons 
- EXT Button 
- Basic Command Buttons 
- Secondary Command Buttons 
- Multi-Step Buttons 
- Setup Button 
- Operating the RR‑1060
- Sending IR Commands   
- Smart Macro Commands   
- Multi-Step Button Operation 
- Backlighting 
- Programming
- Programming Rotel components by Model Search     
- Programming by Brand Name     
- Programming by 4-Digit Code     
- Programming by Auto-Search       
- Learning Commands From Another Remote
- Learning Commands     
- Multi-Step Button Learning 
- Smart Macro Programming
- Smart Macro Programming     
- Clearing a Smart Macro    
- Changing a Smart Macro    
- Clearing learned commands
- Clearing a Single Learned Command     
- Clearing a All Learned Commands for a DEVICE/INPUT Button   
- Clearing a All Learned Commands for ALL DEVICE/INPUT Buttons  
- Custom Labels
- Switching between two pages of labels  
- Editing DEVICE/INPUT button labels   
- Editing COMMAND button labels   
- Changing Smart Macro labels   
- Additional Setup Options
- Volume Punch-Through  
- Disabling the Beep Tone  
- Clone Function  
- Restore Factory Defaults  
11
Overview
The RR-1060 is a universal learning remote con-
trol that can operate all of the components in your
audio/video system. Control codes for Rotel com-
ponents are already programmed. You can easily
customize the RR-1060 to operate other compo-
nents by selecting command sets for hundreds of
components from the RR-1060’s extensive data-
base. See the Programming section of this manu-
al for easy to follow instructions. For components
not in the database or for additional commands,
you can teach the RR-1060 commands using your
existing remotes. See the Learning section of this
manual for easy to follow instructions.
Once the programming is complete, select a
component with the press of a button to turn
the RR-1060 into the remote control for your CD
player, TV, or VCR.
Here is the layout of the RR-1060:
IR Emitter/Sensor
The IR Emitter/Sensor is located in the top edge of
the RR-1060. It sends the IR commands and must
be pointed at the desired component. It also re-
ceives IR codes from your other remotes during
the LEARNING process.
LCD Display
The LCD DISPLAY provides status information in-
cluding the device currently selected and a cus-
tomizeable label for each button as it is pressed.
The eight character alphanumeric display also
provides simple prompts when programming the
RR-1060. These indicators and prompts are noted
in the appropriate sections of this manual.
Light Button
The RR-1060 provides automatic backlighting in
a dim room. The backlighting turns on whenev-
er a button is pressed, including the LIGHT but-
ton on the side of the remote. The backlighting
stays on for about 5 seconds each time a button
is pressed.
NOTE: In a bright room, the backlighting function
is disabled to save battery power.