Owners Manual

14 RR-1060
At the bottom right are nine buttons that dupli-
cate the cursor functions for cable or satellite TV
receiver or audio/video components plus four
round buttons are for extra functions, such as Last
Channel, Viewing Guide, etc.
At the bottom left are five oval buttons that dupli-
cate the basic transport control functions (Play,
Fast Forward, Pause, etc.) of a CD player, DVD
player or video tape recorder.
NOTE: The numeric buttons, 0 – 9, are also avail-
able for sending Smart Macros.
Secondary Command Buttons
Under the folding cover is a group of buttons which
provide secondary command functions. Open the
folding cover to access these buttons.
The function of these buttons varies depending
on the device selected with the DEVICE/INPUT
buttons. For example, the top two rows have com-
mands for A/V receivers (see labels printed on
the buttons) or commands for CD players (see la-
bels printed above and below the buttons). The
two rows below these have commands for A/V
receivers (see labels printed on the buttons) or
commands for DVD players and VCRs (see labels
printed above and below the buttons). The bottom
two rows of buttons include commands for TVs.
Multi-Step Buttons
In addition to normal functions, the five buttons
labeled SCAN, PTY, P-TUN, TP and TA provide a
special option – learning up to three commands
on a single button from another remote. The first
command is sent when the button is pressed once,
the second command is sent the next time the but-
ton is pressed, and the third command is sent the
third time the button is pressed. See the Learning
Multi-Step Buttons section for information.
Setup Button
The SETUP button in the lower right corner under
the folding cover, is used to enter the setup mode
for programming, learning, relabeling, storing
macros, and other configuration functions.