Owners Manual

16 RR-1060
When a button is pressed, a beep tone confirma-
tion is heard. This feature can be disabled. See
the Disabling the Beep Tone section of the manual.
When an IR command is being sent, a triangu-
lar indicator appears in the upper right corner of
the LCD display and the label for the command is
shown in the display. These labels can be custom-
ized. See the Labelling Command Buttons section
of this manual. If a button is pressed that has no
command, the LCD shows NO DATA.
Smart Macro Commands
Twenty of the buttons on the RR-1060 (the 10 DE-
VICE/INPUT buttons plus the number buttons 0 –
9) can store multiple command macro sequences
– for example, a sequence that turns on the TV set,
selects channel 5, turns on the surround proces-
sor, and selects the TV input. A macro sequence
is sent by pressing the SMART button followed by
the button where the macro is stored:
1. Press the SMART button. A SMART? prompt
appears in the LCD.
2. Press the button where the Smart Macro se-
quence is stored.
NOTE: If you push a Smart Macro button that has
not been programmed, the word EMPTY followed
by the name of the button appears in the display
and the remote returns to normal mode.
Multi-Step Button Operation
The five buttons labelled SCAN, PTY, P-TUN,
TP, and TA provide a special option – the abil-
ity to learn up to three different commands. The
first command is sent when the button is pressed
once, the second command is sent the next time
the button is pressed, and the third command is
sent the third time the button is pressed.
Backlighting
In a dark room, the RR-1060 automatically acti-
vates its backlighting feature for 5 seconds when a
button is pressed. Press the LIGHT button to manu-
ally turn on the backlighting in a dim room. This
button is disabled in a bright room.