Owners Manual

24 RR-1060
Smart Macro Programming
Twenty of the buttons on the RR-1060 (the 10 DE-
VICE/INPUT buttons plus the numeric buttons 0 –
9) can store multiple command macro sequences
– for example, a sequence that turns on the TV
set, selects channel 5, turns on the surround pro-
cessor, and selects the TV input.
Smart Macro Programming
A macro sequence is sent by pressing the SMART
button followed by the button where the macro is
stored. To program a macro sequence, first make
sure that all of the desired commands have already
been programmed or learned by the RR-1060 – the
Smart Macro feature simply records a sequence
of individual RR-1060 button commands.
1. Press the SETUP button.
2. Press the UP/DOWN cursor buttons until SET-
UP SMART appears in the display. Press the
ENT button to confirm.
3. When the LCD shows the prompt ADD SMART?,
press one the Smart Macro keys (AUD, CD,
TUN, TAPE, EXT, V1–V5, or 0–9). The LCD
briefly shows ADD followed by the name of
the Smart Macro key being programmed.
4 When the LCD shows the prompt STEP 1, press
the first COMMAND button in the Smart Mac-
ro sequence.
5. When the LCD shows the prompt STEP 2,
press the second command in the macro se-
quence.
6. Continue until the Smart Macro sequence
is complete (up to a maximum of 20 com-
mands). Press the SETUP button to finish the
Smart Macro programming.
7. A confirmation message, CONFIRM? appears
in the LCD. Use the UP/DOWN buttons to se-
lect either YES (to save the new Smart Macro)
or NO (to erase the Smart Macro program-
ming). Press the ENT button to confirm.
NOTE: Smart Macro buttons can have custom la-
bels. See the Custom Labels section of the manual
for information.